Model #59665932403 KENMORE Bottom-Mount Refrigerator

  • Cabinet Parts
    3 Results
  • Freezer Liner Parts
    3 Results
  • Freezer Door Parts
    3 Results
  • Refrigerator Liner Parts
    3 Results
  • Refrigerator Door Parts
    3 Results
  • Unit Parts
    3 Results
  • Shelf Parts
    3 Results
  • Icemaker Parts
    3 Results
  • Cabinet
    3 Results
  • Freezer Liner
    3 Results
  • Freezer Door
    3 Results
  • Refrigerator Liner
    3 Results
  • Refrigerator Door
    3 Results
  • Unit
    3 Results
  • Shelf
    3 Results
  • Icemaker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

8 year old refrigerator not cooling on top, bottom freezer making ice

A:

Hi, it's me again, the one that posted this. What I really want to know is should I even try to get a repairman or just go buy a new refrigerator?

Read More
gretchen618 -
February 06, 2013
A:

Oops, me again- it's a Kenmore.

Read More
gretchen618 -
February 06, 2013
A:

I am sorry that you are having some difficulties with your refrigerator and I will be happy to help. I did some research and I was able to find a link that will provide you with some good information. I hope this helps with your research while you wait for your expert response.

Read More
Joseph P. -
February 06, 2013
A:

Thank you for your question. I'm sorry you are having this problem with your fridge. This type of problem will be air flow related and is usually due to a stuck damper inside the air diffuser # W10127429. Another possibility will be a blocked return air vent. A good check for this will be to feel the air flow from the diffuser and while making this check, open the freezer door. If the air flow increases, it indicates the vent is blocked or frozen. You can check the vent by pulling the crispers out and check to see if there is anything on top of the vent. If there is nothing on the vent, it will be frozen. Hot water can be poured into the vent to clear it. This water will come out in the freezer, so be prepared to wipe the water out. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.  

 

Read More
Scott D -
Sears Technician
February 07, 2013
See more answers
Q:

What to do when refrigerater/freezer isn't cold.

A:

I understand that your refrigerator and freezer is not getting cold. I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below for you to view. I hope the link that I provided is helpful. Have a nice day.

Read More
Alina F. -
September 03, 2011
A:

Thank you for your question. I can understand your concern. You have received some good information from Alina. If it�s not cooling at all, it first needs to be determined if the compressor is running. If the compressor is running, the problem will probably be in the seal system or with the compressor. It could be a low charge, a restriction or the compressor may not be pumping properly. These are checks a technician will be required to make.

If the compressor is not running, it could be a problem with the starting device, the compressor itself or if the condenser motor is not running. If the motor is not running and the compressor is very hot, the motor will need to be replaced. If the motor is running but not the compressor, it can be very difficult to determine if the problem is with the starting device or the compressor unless the starting device is burnt. A technician will have a kit and meter, he can attach to the compressor, that will determine if the compressor or starting device has failed. Without this kit and meter, the only way to make this determination will be to take a chance and replace the starting device. If the compressor still won�t run, it will need to be replaced. I�m listing a site you can access, to have a tech come out. Here is a link for the website: Sears Home Services . If you would like more assistance, additional details will be helpful and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
September 06, 2011
See more answers
Q:

Why does the water valve to my ice machine keep supplying water to the ice cube tray?

A:

It sounds like the problem might be that the water pressure is too high. The normal pressure should be 30-40 psi. The valve will handle lower and higher pressures but it may not work properly. It's also possible the valve could be getting voltage to it, all the time, keeping it energized. If water is constantly flowing into the icemaker, try just disconnecting the wire harness at the icemaker. If the water stops, it indicates the icemaker is sending power to the valve, when it shouldn't. If water continues to flow, there could be a wiring problem in the unit or the valve is stuck open. A technician will need to make this type of check. If you need more assistance, you can resubmit your question with more details.

Read More
Scott D -
Sears Technician
September 09, 2009

Top Parts