Model #59661272101 KENMORE Bottom-Mount Refrigerator

  • Door Handles/accessories
    3 Results
  • Controls/light Covers
    3 Results
  • Evaporator/freezer Control
    3 Results
  • Shelving Assembly
    3 Results
  • Cabinet Back
    3 Results
  • Machine Compartment
    3 Results
  • Insulation And Roller Assembly
    3 Results
  • Light Switches/drain Funnel
    3 Results
  • Door Assembly
    3 Results
  • Ice Maker Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Compressor fan is not turning on. 596-61272101

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.

 Since your issue has to do with the compresser you will need to have a service technician diagnose your unit. We do not have access to the repair or diagnostics for the compressor or the fan for the compressor. This is a technician only repair.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
July 23, 2015
Q:

Kenmore fridge stopped running suddenly? Kenmore Refrigerator

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

how do i install a new rubber gasket on my freezer?

A:

I know how important it is to have instructions to repair the gasket on your freezer. I would suggest providing the full model number to better assist the expert. Just add to this thread. An expert will respond shortly. Have a good day.

Read More
Jackie S -
June 15, 2012
A:

. good idea. the model # is 59661272101 and it is a kenmore. thanks for the input.

Read More
David -
June 17, 2012
A:

Thank you for your question. Replacing this gasket can be a challenge. Usually all of the screws will need to be taken completely out and the inner panel will also need to be removed. This will normally require taking the door off and laying it down. Now, with some models, just loosening the screws will be all that is necessary and the inner panel will not need to be removed. I recommend loosening the screws first and then try pulling the gasket, to see if the lip will slide out. If the lip will not slide out, then the screws and panel will need to be taken off. Be sure to pay close attention to how the lip fits in place. I hope this will help you. If you would like more assistance, reply to this thread and I will assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
June 18, 2012
A:

Scott, I tried just loosimg the screws but still was unable to put gasket back on. If I take the door off both doors have to come off and that would be a problem. Can I remove the panel without taking the door off?

Read More
David -
June 24, 2012
A:

David, you are correct, both doors will need to be taken off. Yes, the panel can be taken off without removing the door but it can be very difficult to replace the panel and gasket in this manner. It will probably require 2 people for this. One person will need to hold the panel in place and the gasket at the same time and line up the holes, so the second person can get the screws started. I hope this will help you.

Read More
Scott D -
Sears Technician
June 25, 2012
See more answers