Model #5960 SOUND DESIGN Misc Audio

  • No Image Available - Fidelitone
    3 Results
Find part by diagram >

Question and Answers

Q:

Dead GE Dishwasher GLD5960N10SS

A:

I'm sorry to hear that you are having some difficulties with your GE Dishwasher. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assist you.

Read More
James -
November 11, 2011
A:

If everything is dead then the problem can be a simple loose connection at the dishwasher junction box or a bad control.

First find the circuit breaker for the dishwasher and make sure it is not tripped.

If there is one check the wall switch in the kitchen that controls the dishwasher and make sure it has not been turned off by mistake.

With the circuit breaker turned off remove the lower access panel, kick plate, of the dishwasher. You'll see a junction box where the voltage lines from the house attach to the black and white power wires of the dishwasher. These are usually connected by wire nuts. Sometimes the wire nuts become loose and the voltage is lost.

If all these check okay then next would be checking voltage to the control with a meter.

Check the wire nuts, be sure the power is turned off, and reply with any additional details or questions for further assistance.

Read More
Fred M -
Sears Technician
November 12, 2011
A:

I am a plumber and install dishwashers regularly so I already checked that the unit has power coming into the unit. The connections at the junction box is good and there is power there. The problem is something within the unit itself. I have the test meter but don't know how to anylize the unit. How can I deturmine what the prolem is?

Read More
Mark -
November 13, 2011
A:

The key would be to verify voltage to the main control on the two wires highlighted in the image below.

Read More
Fred M -
Sears Technician
December 05, 2011
See more answers