Model #58A EUREKA Vacuum, Hand-held

  • No Image Available
    3 Results
Find part by diagram >

Question and Answers

Q:

Replacement Mower Deck P/N: 181689 on Tractor M/N: AYP8828A49 Western Auto 1993 20HP Lawn tractor Model AYP8228A49, S/N:030294C-001-91

A:

Thank you for choosing SearsPartsDirect.com. I will be more than happy to assist you. I can understand any frustration you may have experienced with regards to your unit. Let’s see what we can do for you.

I’m showing the easiest thing to replace would probably be the engine pulley. This would be easier on account that you only have to change one pulley vs 5 or 6. Also before you do that have you tried to install a slightly bigger belt on the unit to see if that would solve the issue? You might want to check that route before you replace any pulleys.

Hope this information has helped you. If you are not comfortable doing this repair you can click here to schedule a technician or call toll free 1-800-469-4663. Again, thank you for choosing SearsPartsDirect.com.

 

Read More
JeffwallaceIII -
Sears Technician
May 26, 2015
A:

I am concerned about the pitch of the pulleys. Is the pitch of all pulleys/V-Belts the same? Would I use a longer 1/2" belt to match the pitch of the engine pulley or a longer 5/8" pulley to match the pitch of the mower deck pulleys?

Read More
Tim -
May 26, 2015
See more answers
Q:

Change chuck 12434985 Craftsman Drill press

A:

Thank You for choosing Sears PartsDirect.com. Glad to help out. Im looking at your model number 12434985 and the parts list does not list any other chucks that can be interchanged. We do have adaptors that can be used and here is a linkfor Sears.com.  If you have further questions please resubmit your question for further information.

 
Thank you for choosing Sears PartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
June 10, 2014
A:

This is NOT an expert answer. You completely avoided the question. I already looked at the parts for the model number 12434985 drill press and needed additional EXPERT advice. This is certainly not EXPERT advice. By the way, the link to �??3 8 to 1 2 drill chuck adapter�??(sic) was not of any help. Drill press chucks are different from hand drill chucks. Threads attach hand drill chucks while drill press chucks attach with tapers. With some exploring, I determined that the arbor for the model number 12434985 is an MT2 taper and the chuck is an JT3 taper. The JT3 taper is typically used on larger chucks, 5/8" or larger as it should be and is for this press. The 5/8�?? chuck delivered has a minimum grip of 1/8�??. However, I need a 1/2 chuck with a minimum grip of 1/16"or lower. Further research finds that JT33 taper chucks are typically found on 1/2" chucks. Let us try a more specific question. What is the taper on your Model 124.34983 Illustration Number 54 drill press chuck? Do you have an arbor that is MT2 to whatever the taper is on this chuck? It should be marked on the drill chuck. Thank you for your cooperation.

Read More
James -
June 11, 2014
A:

James... did you ever find the answer to this question? I'd like to find a 1/2" chuck with the MT2 taper that you could recommend to me? Daniel (daniel_juarez@yahoo.com)

Read More
Daniel -
March 17, 2015
See more answers
Q:

Extension spring 107277860 Craftsman Zero-turn rear engine rider

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Yadira B -
May 22, 2013
A:

Thank you for contacting SearsPartsDirect.com with your question about the extension spring for your Craftsman Zero-turn Rear Engine Rider. I understand the need to get the right parts so you can complete your repairs. I apologize that the parts list wasn't clear about how to select the correct spring. After a little research I found that we need to select the spring based on the transmission you have on the rider. In your Owner's Manual Specifications I show that your transmission is a ZC-AHBB-2A7B-1DPX. For that transmission we need to select the Extension Spring key number 58. I have included the link to order the spring.

Extension Spring for Craftsman Model 107277860. They are sold individually, so if you are replacing both sides, order 2.

While you are working on the rider, I recommend completing your engine tune up if you haven't done that yet. I have included the tune up parts links for you also.

Fuel Filter for Craftsman Model 107277860.
Air Filter for Craftsman Model 107277860.
Air Pre-Filter for Craftsman Model 107277860.
Oil Filter for Craftsman Model 107277860.
Spark Plug for Craftsman Model 107277860.
Engine Oil.

If I can be of any further assistance, please respond to this thread. Thank you for choosing Sears, we appreciate your business.

Read More
Rachel Morgan -
Sears Technician
May 22, 2013
See more answers