Model #588 REGAL WARE Food processor

  • Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore washing machine Model 110.26002012 Type 588-06 11026002012 Kenmore Automatic washer

A:

Thank you for your inquiry on your Kenmore Washer, Model: 110.26002012. From reviewing the details on your model,it appears that your model of washer is 3.6 cubic feet. 

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
June 30, 2015
Q:

washer WTW4900BW0

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Whirlpool washer.

From the information you have provided above, after researching model number WTW4900BW0. It may be that the lid lock assembly may need to be replaced.  Over time the shutting of the lid damages the lid lock. If this is damaged it won’t allow the washer to kick on and run the cycles. The part number for the lid lock is W10404050. Make sure all wires are properly connected before you replace. The issue can be with a loose wire.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
February 24, 2015
Q:

White residue on dark clothes wash

A:

I diffidently understand how frustrating this can be. While you are waiting on an expert to answer your question, I was searching the Manage My Life website and found a great link that can help you with your problem. I have attached the link below. Have a nice day!

Read More
Dezeray S -
March 03, 2012
A:

Sorry, I already read this and it does not apply to my situation.

Read More
Anonymous -
March 03, 2012
A:

Thank you for your question.

I am sorry you are having this problem. This washer is a high efficiently model. When you load the washer, it is critical to put the detergent in before you add the load. The reason is the washer does not fill completely with water. If the detergent is on the top of the load, the water will not dissolve the detergent. Next check the kind of detergent you are using. The washer requires you to use name brand HE detergent. If you have a water softener, it is recommended to use half the recommended amount. Next, make sure the water lines are not connected wrong. If they are connected wrong, the water could be too cold and the detergent will not dissolve. I have also added a few images below that will aid in resolving this problem.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
March 05, 2012
A:

Thank you for your question.

I am sorry you are having this problem. This washer is a high efficiently model. When you load the washer, it is critical to put the detergent in before you add the load. The reason is the washer does not fill completely with water. If the detergent is on the top of the load, the water will not dissolve the detergent. Next check the kind of detergent you are using. The washer requires you to use name brand HE detergent. If you have a water softener, it is recommended to use half the recommended amount. Next, make sure the water lines are not connected wrong. If they are connected wrong, the water could be too cold and the detergent will not dissolve. I have also added a few images below that will aid in resolving this problem.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
March 05, 2012
A:

The problem still exsist. As I mentioned above Soap we use: Liquid 'Tide Advanced Power, HE, Plus Bleach Alternative' . The water lines have been correctly connected. We use two rinse cycles but that does not help. Do you have any other suggestions for our white stain on dark clothes problem?

Read More
Ken -
April 15, 2012
A:

Ken, I am sorry that did not cure the problem. The only other thing I recommend is changing the amount of detergent you are using. If you have soft water, I recommend using half the recommended amount. The detergent manufacturers suggested amount is for hard water. If you have soft water, you may be adding too much detergent. Please try this. If you still have problems, a service technician might need to come out and check the operation of the washer. Thank you for using Manage my life. Mark.

Read More
Mark T -
Sears Technician
April 16, 2012
A:

I have the same problem. We have tried everything above to no effect. The problem exists primarily on stretch pants and dress shirts, not socks or fleece.

Read More
John -
October 22, 2012
A:

I am having the same problem with the Kenmore 2130 top loader. Even tried putting my black pant in different levels of the machine. Not happy at all. Have to take a clothes brush and brush the residue off. Did not buy a new washing machine to have to do this, never had this problem until I bought this Kenmore. Could it be this model is the problem and not the users.

Read More
Sarah -
March 17, 2013
A:

I am sorry you are having this problem. This washer is a high efficiently model. When you load the washer, it is critical to put the detergent in before you add the load. The reason is the washer does not fill completely with water. If the detergent is on the top of the load, the water will not dissolve the detergent. Next check the kind of detergent you are using. The washer requires you to use name brand HE detergent. If you have a water softener, it is recommended to use half the recommended amount. Next, make sure the water lines are not connected wrong. If they are connected wrong, the water could be too cold and the detergent will not dissolve. If you still have problems, a service technician might need to come out and check the operation of the washer. Thank you for using Manage my life. Mark.

Read More
Mark T -
Sears Technician
March 19, 2013
A:

I did all the above. Tech came out to verify I was doing all the right things including using very small amount of detergent, like less than an 1/8" in the cup. Tech called his tech to get more solutions that he could not figure out at our house and between the two both could not figure out a solution. Only thing the tech suggested is call for tech service next time this happens. I could be calling them every time I do a wash. Instead I wash the dark loads twice. So much for saving water. It certainly adds time to the wash day. Guess I'm stuck with a lemon.

Read More
Ken -
March 19, 2013
See more answers