Model #58716253400 KENMORE Dishwasher

  • Control Panel
    3 Results
  • Door
    3 Results
  • Tub
    3 Results
  • Motor & Pump
    3 Results
  • Frame
    3 Results
  • Racks
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Dishwasher doesn't start and it does not shows any lights in the front panel. I alredy checked circuit braker 58716253400 Kenmore Dishwasher

A:

Don't let a Kenmore dishwasher that won't start ruin your day. Ask an expert on managemylife.com and you may have that dishwasher working sooner than you think. The link provided below may have some helpful information while waiting for a response from your expert. If you decide on service, that link is available below.

Read More
Anna T -
January 28, 2013
A:

Thank you for your question and I understand your concern.

The first thing that should be checked is the wire connections inside the electrical junction box where the power supply is connected. The black and white wires are normally connected with plastic wire nuts. You will need to flip the house circuit breaker off dedicated for the dishwasher before removing the lower access panel and junction box cover. If the connections are Okay, the next thing to do is to check and confirm the proper voltage supply of 110-120- volts with a voltage meter. NOTE: I do not recommend measuring the voltage across the black and white wire unless you have experience and feel safe and confident in doing so; otherwise I recommend calling a service technician to diagnose and repair your dishwasher.

If the voltage supply is Okay, the next thing is to check and confirm if the voltage supply is making it all the way up to the door switches and to the control board. Always check across the black and white wires for voltage. On the control board, check across P3-6 and P3-7 with the door open. When to door/door switch are closed, check voltage across P1 and P3-7 terminals. If voltage is present across P1 and P3-7 with the door closed, the control board is likely faulty.

Check the things I have covered here and if I may be of further assistance as more details become available, please reply to this post.

I added an image below of the wiring diagram. If the image is too small, see the second response image.

Read More
Joey S -
Sears Technician
January 29, 2013
A:

Jimmy: The image below will be larger.

Read More
Joey S -
Sears Technician
January 29, 2013
See more answers

Top Parts