Model #58715262900 KENMORE Dishwasher

  • Control Panel
    3 Results
  • Door
    3 Results
  • Tub
    3 Results
  • Motor & Pump
    3 Results
  • Frame
    3 Results
  • Racks
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

# 58715262900 KENMORE Dishwasher question # 58715262900 KENMORE Dishwasher

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dishwasher. Upon researching model 58715262900; you can reset the electronic control board by unplugging the unit’s power cord for 5 minutes and then reapplying the power. If the problem persists then the electronic control board may have failed. The electronic control board governs the functions of the unit so when the controls board fails it can cause the controls to become unresponsive. I have posted a link of the electronic control board to view the link click here.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
August 04, 2015
Q:

DISHERWASHER MODEL 587 58715262900A Kenmore Dishwasher

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore dishwasher.

From the information you have provided above, you can place 4 cups in each corner right side up, Start the dishwasher and after the fill cycle let the unit run for 45 seconds. All 4 cups should be full of water. If the cups are not full, this indicates a low water charge or poor circulation. If the water supply is good and the unit is filling properly, I would recommend checking the pump/motor assembly. If the water volume is low, I would recommend checking the water valve and supply pressure. Be sure the feed tube holder is not cracked and is in place.

Check your spray arm nozzle holes and make sure none are clogged or partially blocked.

Something else to check is suds in the water. During a wash you can pause it and take a look and make sure there is no suds in the water. Excessive suds can lead to poor circulation.

Make sure you're not blocking the spray arms with large bowls or cookie sheets.

Check the screens and the water level. Water valve screens can become partially blocked and not allow the proper water level. You can even add a glass or two of water and see if it cleans the top rack better. The filter can become partially blocked

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
January 02, 2015
Q:

dishermodel top arm not spraying 58715262900A Kenmore Dishwasher

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore dishwasher.

From the information you have provided above, you can place 4 cups in each corner right side up, Start the dishwasher and after the fill cycle let the unit run for 45 seconds. All 4 cups should be full of water. If the cups are not full, this indicates a low water charge or poor circulation. If the water supply is good and the unit is filling properly, I would recommend checking the pump/motor assembly. If the water volume is low, I would recommend checking the water valve and supply pressure. Be sure the feed tube holder is not cracked and is in place.

Check your spray arm nozzle holes and make sure none are clogged or partially blocked.

Something else to check is suds in the water. During a wash you can pause it and take a look and make sure there is no suds in the water. Excessive suds can lead to poor circulation.

Make sure you're not blocking the spray arms with large bowls or cookie sheets.

Check the screens and the water level. Water valve screens can become partially blocked and not allow the proper water level. You can even add a glass or two of water and see if it cleans the top rack better. The filter can become partially blocked

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day

Read More
Benny23 -
Sears Technician
January 02, 2015

Top Parts