Model #58715249702 KENMORE Dishwasher

  • Control Panel
    3 Results
  • Door
    3 Results
  • Tub
    3 Results
  • Motor & Pump
    3 Results
  • Frame
    3 Results
  • Racks
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Width 58715249702 Kenmore Dishwasher

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dishwasher. Upon researching model 58715249702; based on the model number provided, this model is 24” wide.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
August 09, 2015
Q:

Kenmore Dishwasher making an odd sound, why?

A:

With the Dishwasher making noise can be quite concerning. I have taken the time to research on the Manage My Life website and have located similar information towards your issue. While you are waiting for a detailed reply from an expert I have added the link below. Hope this helps!

Read More
Priscilla V -
February 22, 2012
A:

I know that it can be very difficult to have issues with your dishwasher. However, without your model number I can not provide any specific information on this issue. It sounds like there may be a connection issue within the unit. Normally, the pump will not run until the washer section starts. If you could please reply with the model number, I can do some research into this problem and give you a more detailed answer. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
February 22, 2012
A:

Thanks for the quick response, the kenmore model number is 587.15249702

Read More
Kelsie -
February 22, 2012
See more answers
Q:

Kenmore dishwasher

A:

A Dishwasher is definitely something we depend on and when it begins to malfunction it can be a huge inconvenience. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.

Read More
Priscilla V -
October 06, 2011
A:

Thank you for your question and I understand your concern.

If the door will not latch then it's a mechanical failure and not an electronic control or electrical issue. However; the dishwasher is not going to operate unless the door is latched and the latch assembly closed the door switches. Removing and replacing the latch assembly will likely resolve the problem. You also need to open the door and check to see if the door strike is broken located at the front top center of the tub.

The part number of the door latch is #154556703 which can be ordered from SearsPartsDirect .

I added a couple of images below with instructions on replacing the door latch.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
October 07, 2011
See more answers

Top Parts