Model #58715072200 KENMORE Dishwasher

  • Control Panel
    3 Results
  • Door
    3 Results
  • Tub
    3 Results
  • Motor & Pump
    3 Results
  • Frame
    3 Results
  • Racks
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

My dishwasher works, but the lights do not light up on the panel 58715072200 Kenmore Dishwasher

A:

Thank you for choosing sears I would be happy to help you with your dishwasher. Upon researching model 58715072200; it sounds like you may need to replace the control panel. The control panel has the lights built in to it, parts are not sold separately for the control panel assembly so would have to be replaced if any part within the control panel assembly stops working. I have posted a link below of the control panel key#1.

I trust that this information will help you, thank you have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
October 30, 2014
Q:

drain hose hookup? 58715072200 Kenmore Dishwasher

A:

Thank you for choosing SearsPartsDirect.com. I understand how important it is to be able to hook up your drain hose. I have included a link to our ManageMyLife page where you can view the installation instructions for your dishwasher. Just click the blue link below to be taken to the page.
Installation Instructions for Kenmore Dishwasher Model # 58715072200
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services
If you have further questions please let me know. Thanks for using SearsPartsDirect.com.

Read More
Lokelani -
Sears Technician
October 10, 2013
Q:

What is wrong with my Kenmore model 587.15072200 dishwasher when the pump starts when I shut the door and the LED lights are flashing on the non responding control panel?

A:

From the description you give you may have more that one problem. Flashing LED lights on this dishwasher usually are flashing an error code but the pump running and non-responsive control sound like a stuck or shorted keypad.

The image below contains the wiring diagram and the display codes that might flash. If the option lights are flashing it would indicate a power failure. If the status lights are flashing it would indicate the door is open.

If the pump runs when the door is shut then either a relay on the control board is stuck closed or there is a stuck keypad.

From the description you give there is something you might try if you don't mind a little do-it-yourself.

Turn the power to the dishwasher off and referring to the 2nd and 3rd image below access the control board and disconnect the ribbon connector to the interface.

You can leave it disconnected and try to put the control back together so you can shut the door and see if it starts. If it starts with the ribbon disconnected then you have a stuck relay. If the pump doesn't start to run then most likely you have a stuck keypad.

Both can be obtained from the following link: Sears PartsDirect .

I hope this information is helpful to you in resolving this problem but submit another question with any additional details for further assistance.

Read More
Fred M -
Sears Technician
October 18, 2009

Top Parts