Model #58714859200 KENMORE Dishwasher

  • Control Panel
    3 Results
  • Door
    3 Results
  • Tub
    3 Results
  • Motor & Pump
    3 Results
  • Frame
    3 Results
  • Rack
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

kenmore portable dishwasher fitting size and type of thread on the connection.

A:

I did some research on the part number but was not able to find the fitting size and thread type. Your expert will be able to help answer your question. It may take two business days for your expert to reply. I do hope that everything works out.

Read More
Marc -
March 24, 2013
A:

The faucet areator must be removed.  Most adaptor are Male/Female 15/16" x 27 outside threads and 55/64" inside threads.  Most have threads inside and outside but adaptor will not fit all faucets.  If you unscrew the faucet areator and take it to a hardware store they should be able to match it up.  Faucets without a removable aerator will not work. 

Read More
Fred M -
Sears Technician
March 26, 2013
A:

i am not inquiring about where the faucet adapter attaches to the faucet. There two nipples on the adapter to attach hoses, one for inlet and one for outlet. I want to know the size of the outlet and the type of threads on it. I cann't find that info or a fitting in the hardware store or Home Depot. There must be manufacturing or bid specs. somewhere.

Read More
allan -
March 26, 2013
A:

i am trying to send you an image but cann't find an extension acceptabe to your system. i down loaded a parts diagram from sears parts, printed it, and marked the location on the parts i am talking about. How do i send it to you? Do you have a fax?

Read More
allan -
March 26, 2013
A:

Try the following link to SearsPartsDirect page for the model 587.14859200 dishwasher: SearsPartsDirect . You can reply back with reference to the part key number. The coupler with hoses is not a serviceable item and will need to be replaced as a complete assembly.

Read More
Fred M -
Sears Technician
March 27, 2013
See more answers

Top Parts