Model #58714419400 KENMORE Dishwasher

  • Control Panel/door
    3 Results
  • Tub
    3 Results
  • Motor 7 Pump
    3 Results
  • Wrapper
    3 Results
  • Racks
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Water won't go into Kenmore Model 58714419400 dishwasher 58714419400 Kenmore Dishwasher

A:

Thank you for your inquiry on your Kenmore Dishwasher, Model: 587.14419400 From reviewing the details on your model, if the dishwasher is not getting or filling with enough water it's not going to spray any water up and through the spray arms. Open the door and manually add about 1/2 gallon and then shut and latch the door and then listen to the pump action. If it sounds like its washing, open the door rapidly and you should also see water spraying. If it's spraying/pumping water through the spray arms then the most likely failure is a restricted water inlet valve or inadequate water supply to the water inlet valve.Check that float switch in the bottom of the tub. You can shut off the house circuit breaker and the water supply then pull the dishwasher out from under the counter. Pull the water fill line off of the fill valve and check the inlet water screen for debris or deposits that could prevent the dishwasher from filling. Place the end of that fill line in a container and briefly open the water supply cut-off valve to check for proper water pressure and flow from the end of that supply line. If the water supply is okay, then replacing that inlet water valve may be necessary.

Safety Warning: Before beginning the repair, disconnect the direct power supply to the dishwasher to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
April 24, 2015
Q:

Alternative to vinyl hoses? 58714419400 Kenmore Dishwasher

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your dishwasher and I do understand your frustration. Glad to help out. I'm looking at your model number 58714419400 and here are the part numbers for the hoses that are available for your unit. 82124864396897rw w10278627rc 6 foot hose, w10278625rp 4 foot hose. I have included a link to our Parts Direct page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
January 06, 2015
Q:

Front roller 58714419400 Kenmore Dishwasher

A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your dishwasher and do understand your frustration. Glad to help out. Im looking at your model number 58714419400 and the roller/caster has a ring clip or e clip that hold the shaft in place. Here are some images on removing a clip. You can use a pair of pliers to snap the ring back into place. I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. If you have further questions please resubmit your question for further information.
 
Thank you for choosing Sears PartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
April 30, 2014

Top Parts