Model #58714309200 KENMORE Dishwasher

  • Control Panel
    3 Results
  • Door
    3 Results
  • Tub
    3 Results
  • Motor & Pump
    3 Results
  • Frame
    3 Results
  • Racks
    3 Results
Find part by diagram >


Error Codes

Error Code:



Question and Answers


Old Condo Dishwasher Manual 587.1430590


Thanks for the inquiry and for being a valued member.

You are correct; the model specific manual is no longer offered and is not available via digital download. I was able to find two manuals that are close to the model number for your dishwasher. I have linked them below for convenience.

Manual for Model 58714302200

Manual for Model 58714309200

I hope these help and thanks for using We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
December 15, 2014

What is wrong when my Kenmore model 58714309200 dishwasher stopped mid cycle with several flashing lights?


From the description of your problem the dishwasher started by itself and then stopped and flashed the led lights.

If the dishwasher started by itself the most likely problem is a stuck or shorted keypad. If the problem is intermittent you can access the control and disconnect the ribbon and reinstall it and see it the problem stops. Most likely the interface will need to be replaced.

The images below contain some service information that might be helpful with this problem.

The led lights flashing can indicate certain failures. See the first image for this. The option lights (sir dry, hi-temp) blinking indicate a power failure. A power failure error is usually caused by a loose wire nut on the incoming voltage line at the junction box behind the lower access panel.

The status lights (wash, clean) flashing indicate an open door switch. Sometimes after start up the pressure inside the dishwasher pushes on the door and breaks the door switch connection.

The 2nd image contains the instructions for running a diagnostic cycle. You can try this couple of times and see what the results are.

I hope this information helps to resolve this problem but if after making some checks you have any additional problems then submit another question with any additional details for further assistance with this problem.

Read More
Fred M -
Sears Technician
June 06, 2009

Top Parts