Model #58714249991 KENMORE Dishwasher

  • Control Panel
    3 Results
  • Door
    3 Results
  • Tub
    3 Results
  • Motor/heater/spray Arm
    3 Results
  • Frame/wrapper
    3 Results
  • Rack
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How to replace the spray arm in my dishwasher

A:

I can understand having this issue with your dishwasher repeatedly can be frustrating. I have provided a link below that is a diagram of your dishwasher that may be helpful until an Experts responds. I hope this helps .Have a great day!

Read More
Carmen G -
July 29, 2012
A:

I can understand how important it is to have the right information for your dishwasher. The spray arm and tower for this model can only be ordered in individual parts. It is no assembly available for this. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
July 30, 2012
A:

Ok, so the tower is 3 separate parts? and when I checked into those it says part # 46 the tower tip is no longer available? So I am confused as to how I am supposed to fix this issue. Currently the tower does not go back into the spray arm all the way, which is why I believed that to be broken. The spray arm is also resting on the heater coil, which is another reason I thought that part was broken...

Read More
Lanie -
July 30, 2012
See more answers
Q:

18" Kenmore dishwasher filsl wth water but does not pump

A:

A dishwasher is definitely something we depend on and when it begins to malfunction it can be a huge inconvenience. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.

Read More
Barbara H. -
November 10, 2011
A:

If the dishwasher will fill with water then the door switches are okay.

If the motor doesn't wash or drain then the motor windings can be checked for resistance/continuity.

First turn the power to the dishwasher off.

At the motor there are four wires. Try ohming the red, black and blue wires to the white wire. If any circuit is open then the motor is bad.

Try this and reply with any additional details or questions for further assistance.

Read More
Fred M -
Sears Technician
November 12, 2011
See more answers
Q:

2 drain connections at dishwaser pump? Confused??

A:

I understand your concern toward wanting to make sure all of the connections on your dishwasher are properly secured and installed. While you are waiting for an expert answer, I suggest you look in your owners manual for useful tips. Below is a link in where you can enter your model number and your owners manual will pop up. I hope my link is useful.

Read More
Joseph P. -
January 03, 2011
A:

Thank you for your question.

Repairing the dishwasher yourself is a satisfying

I can understand your confusion because there should only be one drain hose connection on the pump.

I will send a picture below of the 18 inch training pump module and it will have only one drain port on the pump.

In the parts diagram it also shows one drain port.

I hope this will help.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
January 06, 2011
See more answers

Top Parts