Model #5871 SOUND DESIGN Tabletop Systems

  • Cassette Deck
    3 Results
  • Front Panel
    3 Results
  • Cabinet
    3 Results
Find part by diagram >

Question and Answers

Q:

I have a ted williams 9.9 hp boat motor & I need to know what the mixture ratio and a manual 4 it

A:

The mixture ratio is 50:1.

The manual is no longer available but any parts that still are can be found at the Sears PartsDirect site.

You can also use information and parts from some of the Mercury Marine 9.9 Hp motors of the same era as they were a partner in the design and manufacturing and much of the information and many of the parts will interchange.

Read More
HVAC & Fireplace Bucket -
Sears Technician
June 27, 2008
A:

I need to know what the mixture ratio is for my 9.9 Sears out board motor is. rustykurtz@comcast.net

Read More
Melvin -
April 04, 2015
See more answers
Q:

How do I put my freezer door back on my kenmore elite trio It is bottom tilt out freezer

A:

Depending on the model and style, some bottom freezer doors can be difficult to install even for a technician. It also depends if the complete door assembly was removed or if the door was removed from the hinge. Unfortunately without a model number, I'm unable to access any information about your refrigerator. For more specific information about your refrigerator, please resubmit your question, with additional details.

Read More
Scott D -
Sears Technician
May 28, 2010
A:

I'm having issues with the tilt hinge. How do I seat the hinge so it fits into the rail assembly which hooks at the bottom? It's the Kenmore Elite bottom freezer model 795.785*, 7855*, 5871* or 7872* (these are on the owners manual which doesn't show the right tilt hinge assembly.)

Read More
Thomas -
August 21, 2011
A:

I'm having the same problem. Model 795.7756,7757 It is the freezer tilt out door. One side somehow got released and we lifted and took off door; now we cannot get it back on.

Read More
Ellen -
August 18, 2013
A:

I'm also having the same problem on Model 795.*7756*7757*. Door came unhooked on one side of freezer door.

Read More
Giselle -
August 18, 2013
See more answers
Q:

Scrubbed not spinning F5871-900 Hoover Steam vac

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Alina -
May 04, 2013
A:

Thank You for choosing SearsPartsDirect.com

I can understand the frustration when you steam vac is not working like it should. I would be happy to work with you in finding a solution to this issue today.

Based on the information you provided sounds like the issue is with the either the actual brushes or the turbine that spins the brushes.

I recommend looking at the brushes first because the brushes are attached to plastic gears, dabri can easily get cause and cause the plastic to break. If the brush assembly looks fine and you can turn the brushes by hand then the turbine needs to be replaced.

I have included a links to our PartsDirect page where you can purchase the parts you need to complete your repair. Just click the blue links below to be taken to the page.

Brush Assembly for Model F5871-900

Turbine Assembly for Model F5871-900

If you have further questions please let me know.

Thanks for choosing SearsPartDirect.com

 

Read More
Desirea -
Sears Technician
May 06, 2013
See more answers