Model #58076081700 KENMORE Air Conditioner -Room

  • Cabinet/front Grille Assy
    3 Results
  • Control Box Assy
    3 Results
  • Air Handling/cycle Parts
    3 Results
  • Compressor Parts
    3 Results
  • Installation Kit Assy
    3 Results
Find part by diagram >

Question and Answers

Q:

My ubit is not cooling. Is there a way I can add freon to solve the problem? Getting HOT in Texas! 58076081700 Kenmore A/c

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions.
Your Sears partsdirect expert will research your question and respond within two business days but usually sooner.
Thank you for using Searspartsdirect.com!

Read More
Henry -
June 14, 2013
A:

Thank you for your question. I know it's frustrating when the a/c unit stops cooling. First, it will need to be determined if the compressor is running or just the fan motor. If the compressor is running, it could be a low charge or it may not be pumping. A qualified technician will need to make this type of check. If the compressor is not running, the problem could be with the control board, the capacitor or the compressor itself. These are checks a technician will need to make. I'm listing a link you can access, to schedule a tech to come out. Here is a link for the website: Sears Home Services. I hope this will help you. If you would like more assistance, reply to this thread and I will assist you further.

Read More
Scott D -
Sears Technician
June 15, 2013
See more answers
Q:

Can you help with an air conditioning unit problem?

A:

Now that summer is approaching its time to get this Air conditioner going so your home could be nice and cool. While you are waiting on an expert to answer your question, I suggest you set service with a Sears technician. I have attached the link below. Have a nice day!

Read More
Dezeray -
April 24, 2012
A:

Thank you for using Manage My Life. The reason why the lights are dimming when the appliance tries to start is the appliance is drawing excessive amounts of current, which indicates that there is a major issue with the internal electrical. Which component has failed is uncertain without removing the window ac unit from it's shell and electrically testing the control board, motor, compressor and capacitor of the appliance.

If the appliance is sharing the same electrical circuit as another appliance, I recommend moving the window ac to be on it's own electrical circuit. If the appliance is plugged in with an electrical cord, the electrical cord should be eliminated.

Read More
Andrew D -
Sears Technician
April 25, 2012
A:

Thanks. Sorry to be so slow to answer back but was not sure how the managemylife worked. My original question said that the fan does not work: wrong, it does but compressor won't start. I did try the unit on a separate circuit and still just get a "click" each time the compressor tries to start. After discussing it with a repair-person on phone have decided that any level of repair short of a simple reset or similar, would not be cost-effective since I can get a new 8000 BTU unit for about $280 that includes a 5-year warranty. Thanks for taking the time to respond.

Read More
Anonymous -
June 15, 2012
A:

It definitely sounds like there is either a combination of the problems I listed or just an issue with the compressor. When a motor attempts to draw excessive amps, you will see the lights flicker.

This is especially common in older homes with older central HVAC appliances. Window AC compressors usually cannot draw enough current to cause a power drain, but it is possible. It is why I suggested you might want to have that outlet or circuit checked out by a licensed electrician. There may be nothing wrong, but there may be an electrical issue that caused the compressor to fail. <

A compressor that doesn't pump and just clicks could have a busted shaft internally or if there is a humming sound, it could be seized.

Read More
Andrew D -
Sears Technician
June 15, 2012
See more answers
Q:

Kenmore Air conditioner Unit Problem

A:

Keeping cool without a working air conditioner is not easy. I located a troubleshooting guide that may help while you wait for the expert response. I would suggest adding the complete model number to help the expert provide the best answer to help. If you do decide to schedule a technician to diagnose and make repairs, the Sears Home Services link is below. I hope some of this information helps to get this a/c working.

Read More
Barbara H. -
May 20, 2012
A:

Thank you for your question. If you could, please provide a model number of your window air conditioner so I can get a better idea of the type of control that it uses.

Read More
Andrew D -
Sears Technician
May 21, 2012
A:

The Model# for the Kenmore Air Conditioner Unit is 580.76081. Also, the repair parts list manual shows a slightly different model number, it is 580.76081700. I don't know if the last three numbers are needed.

Read More
Nanci Perez -
May 21, 2012
A:

This unit has two boards. One for the display and one main control. It looks as if you need a new display board as the keys you are pressing are not forcing a change that is controlled by the display PCB. If you choose to replace it yourself, I also suggest replacing the ribbon cable that connects between the display PCB and the main PCB. The part number for the display PCB is 6871A20418D and the part number for the ribbon cable is 6850A90001R.

Read More
Andrew D -
Sears Technician
May 21, 2012
A:

Andrew, where can I find the parts that I need in order to fix the a/c, also is this going to be complicated or can I possibly do it myself. I' m not very handy with these type of things but I am willing to try.

Read More
Nanci Perez -
May 23, 2012
A:

The parts would be available on Sears Parts Direct. I appreciate the honesty and willingness to learn. Anytime you are dealing with electricity or electrical components, if you don't feel comfortable with the repair or are unfamiliar with electrical wiring, it is best to have a trained service technician complete the repair.

Here is a link to Sears Home Services where you can schedule an appointment to have one of our technicians come to your home and complete the repair.

Sears Home Services

Read More
Andrew D -
Sears Technician
May 23, 2012
See more answers

Top Parts