Model #580752810 CRAFTSMAN Power Washer, Gas

Find part by diagram >

Question and Answers

Q:

Gas Leaking 580.752810

A:

Thanks for the inquiry and for being a valued member.

I am sorry to hear that the carburetor is flooding the air box. I know how frustrating that is. This is likely caused by a sticking needle within the carburetor, which is constantly allowing fuel to enter and flood.

I would pull the carb from the engine. With a full can of carb cleaner, a wire brush, and a bread tie wire to poke through and clean the main jet; I would recommend a very thorough cleaning. Start by taking off the float bowl. Douse it very liberally with carb cleaner, and undo the pin for the float, and remove the needle and float. Clean them very thoroughly with the wire brush and carb cleaner. Pay close attention to the seat the needle sits in and clean it well. Once clean, start brushing the carb bowl and body and make sure you get all the varnish out. It may take three or four brushings with carb cleaner dousing in-between. From there, take the straw of the carb cleaner and shoot carb cleaner through any little hole or passageway of the carb. Shoot out the throat of the carb and poke the main jet with the bread tie wire. You have to make sure you get everything the first time, if you leave anything behind, it’s likely to reclog once you have it reassembled. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business.  

Read More
Jeff Wallace Sr -
Sears Technician
May 18, 2015
Q:

Cleaning solutions won't dispense from any of the 4 jugs 580752810 Craftsman Pressure washer

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

pressure pump install 580752810 Craftsman Pressure washer

A:

Thanks for the inquiry and for using SearsPartsDirect.com.

There isn't a gasket for the install of the pump. I would recommend using a sealant like RTV when installing the pump, that will help with any leakages. From what I can see, the torque value for the bolts should be around 115 in/lbs. Just make sure you are tightening them in a cris- cross fashion and use a little RTV sealant. From there, you should be in good shape. 

Let us know if we can be of any further assistance and thanks for using SearsPartsDirect.com. 

Read More
Jeff Wallace Sr -
Sears Technician
December 02, 2013

Top Parts

Top Accessories