Model #580752520 CRAFTSMAN Power Washer, Gas

  • Pressure Washer
    3 Results
Find part by diagram >

Question and Answers


Pressure hose leaking 580752520 Craftsman Pressure washer


My craftsman power washer starts but the water is not spraying when i pull the wand trigger. 580752520


Thank you for choosing I will be more than happy to assist you. I can understand any frustration you may have experienced with regards to your unit. Let’s see what we can do for you.

There could be a couple of different issues that could cause this issue to happen. The main would be the unloader valves bad, and not running the pressure correctly. I have found some good information that will help you figure out/ replace the valve. Click here to look at the information I found.

Hope this information has helped you. If you are not comfortable doing this repair you can click here to schedule a technician or call toll free 1-800-469-4663. Again, thank you for choosing


Read More
JeffwallaceIII -
Sears Technician
July 01, 2015

Removing hose from gun 580752520 Craftsman Pressure washer


Thanks for the inquiry and for being a valued member.

I am sorry to hear of the issue you're having with the hose removal from the gun. I know how frustrating that is.

I have seen these hose connections get pretty stubborn if they've been in place a while. You are correct; it is standard thread, so you would turn it left to unthread. There really isn't much you can do other than lightly use a pair of channel locks (careful not to squeeze and crush the connector) to unthread it. Sometimes trying to tighten it slightly before loosening it will help break it free. If you've damaged the connector going to the gun, it may be really tough to get off and hopefully you didn't damage the gun. If so, you may need a replacement gun. 

I hope this helps and thanks for using We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
June 23, 2015

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show