Model #580752310 CRAFTSMAN Power Washer, Gas

  • Main Unit
    3 Results
  • Pump
    3 Results
Find part by diagram >

Question and Answers

Q:

What part number does the water outlet screw in to? 580752310 Craftsman Pressure washer

A:

Thanks for the inquiry and for being a valued member.

The outlet tube threads into the manifold. The manifold on this pressure washer is part number 190627GS.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
August 05, 2015
A:

Hey Jeff, unfortunately, that is not the part that I am looking for...on this diagram...if you zoom in...you see the unlabeled part that water outlet screws into? http://c.searspartsdirect.com/lis_png/PLDM/P0410048-00002.png Both parts B and D attach to the part that I need. it is round and has three holes. I broke the water connector off in this part. And I could not remove the broken water connector piece using a nipple extractor (a plumber's tool)

Read More
Edward -
August 05, 2015
A:

Hey Jeff, unfortunately, that is not the part that I am looking for...on this diagram...if you zoom in...you see the unlabeled part that water outlet screws into? http://c.searspartsdirect.com/lis_png/PLDM/P0410048-00002.png Both parts B and D attach to the part that I need. it is round and has three holes. I broke the water connector off in this part. And I could not remove the broken water connector piece using a nipple extractor (a plumber's tool)

Read More
Edward -
August 05, 2015
A:

the water connector is part B

Read More
Edward -
August 05, 2015
A:

does sears sell unlabeled parts from the diagram? should i bring the damaged part to my local sears store? (sometimes seeing the part is easier than describing it thru email

Read More
Edward -
August 05, 2015
See more answers
Q:

How do you check the check valve on a power washer to see if it is defective? 580752310

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you in locating the instructions to check your check valve on your pressure washer. 

Click here for information. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

 

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
June 23, 2015
Q:

Engine stalls... 580752310 Craftsman Pressure washer

A:

Thanks for the inquiry and for being a valued member.

That is correct; the unloader valve does control the pressure circulation by either pressurizing the water or recirculating it based upon trigger action. If the unloader is sticking, it could cause the engine to stall. 

Another possibility however would be with the carburetor. When you press the trigger, it puts the engine under load. If the carburetor has an internal blockage, it could also kill the engine. 

I would start by cleaning the carburetor, and pulling the unloader valve to see if you can clean it. If the carburetor is clean and the unloader still feels sticking after the cleaning, a replacement unloader may be needed to solve the issue.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
June 11, 2015

Top Parts

Top Accessories