Model #580752201 CRAFTSMAN Power Washer, Gas

  • Pressure Washer
    3 Results
Find part by diagram >

Question and Answers

Q:

I need a set of 4 O rings for pressure washer 580-752201, but keep getting referred the wrong part. 580-752201

A:

Thanks for the inquiry and for being a valued member.

I am not precisely sure which component you are referring to. I believe you mean the outlet tube to the pump. The outlet tube would have two orings, but they are only being offered with the tube itself. The O-ring kit would have O-rings for the hose, and hose to gun. 

You may just opt to buy an assortment set of O-rings. You can buy a variety kit that should have the sizes you need. They can be purchased at most home improvement stores or Sears.com.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
May 13, 2015
Q:

I have a pressure washer 580.752201 and I think someone ( I loan it) touch the output psi. Is this possible? All I see is a knot and a screw .

A:

The Managemylife web site is a good resource to find out what may be happening with your Pressure Washer. I did some research for you at Managemylife.com and found an excellent article that also has multiple expert answers at the bottom of the web page that addresses the most common questions that have been asked by other members. I hope this will help until your expert can answer your specific question. I attached the link below.

Read More
Alina -
May 18, 2013
A:

Thanks for the information about your pressure washer model 580.752201, I will be glad to assist you. The pressure is not adjustable, if you suspect someone attempted to make adjustments I would first ask.   If you are having pressure issues, you should check all the water inlet screens and outlet screens through the nozzle. Loss of pressure can be caused by blockage or a worn pumping system. I hope this helps you, if you have additional concerns reply with more details and I will help as possible. If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services. Ron H.

Read More
Ron H -
Sears Technician
May 20, 2013
See more answers
Q:

How do you clean a carburator on a pressure washer

A:

Manage My Life is a great website to speak directly to an expert who can help you every step of the way to solving the problem you are having. An expert shall have an answer to your question within 24 to 48 hours. Have a great day.

Read More
Alina F. -
August 26, 2011
A:

You can use THIS VIDEO as a reference for how to clean your pressure washer carburetor. The carburetor on the engine in the video may not be exactly like yours but it will be close enough to where you should understand the procedure.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
August 27, 2011
See more answers

Top Parts

Top Accessories