Model #580752060 CRAFTSMAN Power Washer, Gas

  • Main Unit
    3 Results
  • Pump
    3 Results
Find part by diagram >

Question and Answers

Q:

My power washer 580.752060 does not maintain pressure when I squeeze the handle. Water flows originally but when I start the engine the water stops. 580752060 Craftsman Pressure washer

Q:

sears 580.752060 pressure washer,with honda engine 580.752060

A:

Thank you for your inquiry on your Craftsman Pressure Washer, Model: 580.752060. From reviewing the details on your model, if you are not getting any pressure, I recommend cleaning the hole in the nozzle at the end of the wand. If it is plugged it will hold the unloader valve open and the pump will not build pressure. If cleaning the nozzle does not help, I suspect the unloader valve is stuck open. Lime and minerals building in the pump cause this. You can try to remove the unloader and clean the parts to see if it helps. Once you have the unloader out use WD-40 and Scotch bright pad to clean the parts. After you have them clean, reassemble the unit and check the operation. If it still does not work I recommend replacing the unloader.

Safety Warning: Before beginning the repair, disconnect the direct power supply to the pressure washer to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.

 

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
June 05, 2015
Q:

Part numbers for Pressure washer model 580752060 580752060

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.

I do apologize we would need the engine model number. Without the engine model number we are not able to locate the carburetor. The serial number would not help, that is for the manufactures use only. Please resubmit your question with the engine model number. Should be 5 or 6 digits, then 4 to 5 digits, followed by 2 digits.

 
You can also visit searpartsdirect.com for parts, diagrams, and repair information.

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
May 28, 2015

Top Parts

Top Accessories