Model #5648815022 KENMORE Wine Cooler

  • Cabinet Parts
    3 Results
  • Unit Parts
    3 Results
  • "tr" Draught Arm
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

New part does not fit existing part correctly 5648815022 Kenmore Beer dispenser

A:

I looked at an image of the new part. Here is the image that I see from our Sears PartsDirect website: Draft Arm. The hose on that arm should fit your Sankey tap as described in this configuration: Beer Tap Image

If not, let us know what parts don't fit according to the label in that image.

Read More
Lyle W -
Sears Technician
August 06, 2014
A:

D does not fit to G. D is the new part that we just received and G is the part that we already had. The hex nut is is too big to fit onto the coupler. They don't fit so they cannot be screwed together. So, if I order a new coupler will that work with the co2 equipment that i already have? Is there a connector or a way that I can get D and G to work together? I dont want to get to the point where I could have just brought a new kegerator. If we could just get D and G to fit then it would all be connected and it would work. Help!

Read More
DONNA -
August 06, 2014
See more answers
Q:

compressor shutting off after 5 seconds-- beer despencer 5648815022 Kenmore Beer dispenser

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

What type of freon does this beer dispenser use?

A:

The type of freon used should be 134A. The freon type and amount will be stamped on the model/serial tag located on the beer dispenser. If you need more assistance you can resubmit your question with more details.

Read More
Scott D -
Sears Technician
May 11, 2009

Top Parts