Model #5644498510 KENMORE Counter Unit Electric

  • Control And Top Table Parts
    3 Results
  • Power Supply Parts
    3 Results
  • Frame Parts
    3 Results
  • Low Power Work Coil
    3 Results
  • High Power Work Coil
    3 Results
Find part by diagram >

Question and Answers

Q:

Why would on light come on, and not go beyond that for temperature? 5644498510 Kenmore Cooktop

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

model 5644498510 induction cook top right side temp lights flash.

A:

Good morning... I can fully understand your concern regarding this issue. I did locate a link that will discuss your situation in greater detail. Though this link discusses a different model number, the mechanics are likely going to be very similar. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this link will help guide you as to what might be wrong with your stove top burners and have a nice day.

Read More
Henry -
April 09, 2013
A:

Thank you for your question and I understand your concern.

This type of failure will require a service technician to diagnose. It could have one of many possible electrical component failures. There are many electrical components in the unit and some of the major components are no longer available.  It could have a faulty microcomputer control, dead power coil unit, or burnt wire connection. A service technician would disconnect the power supply from the cook top and proceed with a quick check out procedure that would involve switching connections between a working power coil unit and the dead unit. If no change, the power coil unit has likely failed. If it worked, the microcomputer control has likely failed. There are other possible failures but you will need a service technician with the experience and knowledge to properly diagnose and repair your induction cook top. 

I would consider replacing the cook top rather than investing any money due to its age and since some of the components are no longer available.

If you decide to have a service technician diagnose this failure, you can schedule service through this link:Sears Home Services.

Read More
Joey S -
Sears Technician
April 10, 2013
See more answers
Q:

Kenmore induction over...need to know how to bent it. Bought it used.

A:

I know how important it is to receive this information. I would suggest providing more detail and the the full and complete model number. Just add to this thread. Please allow 24-48 hours to receive a response from an expert. Have a good day.

Read More
Jackie S -
April 20, 2012
A:

The model number is 5644498510. I do not know how to vent it properly, or how it works completely. Any help or information would be appreciated. Thank you!! Lynette

Read More
Lynette -
April 20, 2012
A:

I don't have an electronic copy of the installation manual that we can provide to you for that induction range. That installation guide appears to still be available in hard copy as a replacement part. You can order that installation guide from this page: Installation Manual for Kenmore Induction Range 564.4498510 . That manual should help you proper install the range. If you need more help, reply with additional details and we will try to assist you further.

Read More
Lyle W -
Sears Technician
April 23, 2012
See more answers

Top Parts