Model #56425502500 KENMORE Upright Freezer

  • Refrigerator Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How do I replace the Gasket on Model # 56425502500 56425502500 Kenmore Freezer

A:

Thank you for choosing SearsPartsDirect.com. I will be more than happy to assist you. I can understand any frustration you may have experienced with regards to your unit. Let’s see what we can do for you.

Looking at the information it’s a fairly simple job to replace the door gasket. I have found a lot of useful information on the internet I will provide. Click here to get all the information on how to successfully change the gasket on that freezer.

Hope this information has helped you. If you are not comfortable doing this repair you can click here to schedule a technician or call toll free 1-800-469-4663. Again, thank you for choosing SearsPartsDirect.com.

 

Read More
JeffwallaceIII -
Sears Technician
January 14, 2015
Q:

Year made 56425502500 Kenmore Freezer

A:

Thanks for using SearsPartsDirect.com, and for being a valued member. 

Based upon our records for freezer 564.25502500, I show it was manufactured in 2005. This unit may have been sold for a year or so afterwards.

I hope this helps, and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
September 30, 2014
Q:

Switching Door Sides

A:

When it comes to switching the door on an appliance can be tough. You will receive a detailed reply from an expert within 24-48 hours.

Read More
Priscilla V -
September 27, 2011
A:

I just did it to a refrigerator-freezer. The screw holes were already there on the other side. However it looked like the screw holes were there but that they were covered by the plastic top. It looks like some then drilled though the plastic cover, guessing were to find the screw holes. Since the holes in the plastic are not exactly lined up with the screw holes under it. So that is what i'm wondering is it the same thing on this freezer? Are there screw holes just under the plastic top and i just need to basically drill through were i think they maybe?

Read More
Brian -
September 28, 2011
A:

The door on the Kenmore freezer model 564.25502500 can not be reversed. There are no drilled holes to mount the hinge on the left side of the cabinet. There are refrigerant lines inside the cabinet of the freezer. I don't recommend you drill holes into the cabinet.

Read More
Jimmy K -
Sears Technician
September 29, 2011
See more answers

Top Parts