Model #54A EUREKA Vacuum, Hand-held

  • No Image Available
    3 Results
Find part by diagram >

Question and Answers

Q:

Which part is the control for a large surface eye, part 54 or part 54A? 79094213401 Kenmore Electric range

A:

The control for the large element on model number 790.94213401 is 54A. The part number is 5303935086.

Read More
Ernest7574 -
Sears Technician
November 03, 2015
Q:

Wiring to item 316049800 790.92681300

A:

Thank you for your inquiry on your Kenmore Range, Model: 790.92681300. From reviewing the details on your model, I have provided a link to a couple of videos on similar models of ranges, which should be able to assist you in replacing the switch. 

Click Here

Safety Warning: Before beginning the repair, disconnect the direct power supply to the range to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.

 

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
May 28, 2015
A:

I found that the Sears schematic was incorrect. The part number listed was the wrong one. I was able to find the correct part number on the old switch and have now ordered the correct item.

Read More
Dan -
May 28, 2015
See more answers
Q:

deck deflector replacement 917.273373

A:

Thanks for the inquiry and for being a valued member. 

I was able to find an image showing the torsion spring orientation within the bracket and deflector. You have to hold the deflector and spring in position then slide the hinge pin in. First, you have to remove the push nut on the end of the hinge pin. Usually you have to use a pair of diagonal cutters to cut the nut off. After you have the nut off note the position of the spring. In order to install the spring and hinge rod you will need to remove the hinge bracket from the mower deck. Removing the bracket will help remove tension from the spring so that you can position the spring on the deflector and then slide the hinge rod through the spring.


Image result for Craftsman tractor deflector shield installation

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
March 27, 2015