Model #536918300 CRAFTSMAN Snowthrower, Gas

  • Handle Assembly
    3 Results
  • Wheel Assembly
    3 Results
  • Drive Assembly
    3 Results
  • Auger Housing Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

How do I install primer assembly? 536918300 Craftsman Craftsman 24 inch snow thrower

A:

Thanks for the inquiry and for being a valued member.

Unfortunately, due to the age of this Tecumseh engine, there are no written instructions or diagrams. Thankfully, it is not difficult to replace the primer bulb on your snow thrower. Remove the housing the primer is mounted to. Remove the primer and disconnect the fuel lines from the old primer and install them on the new primer.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
January 14, 2015
Q:

I have a craftsman snowblower 536 918300 can anyone tell me how old this is ? 2003 Dirt Devil Compact refrigerator

A:

Thanks for the inquiry and for being a valued member.

Based upon our records for model 536.918300, we show this snow thrower was manufactured in 1979. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
November 01, 2014
Q:

Snow blower wheel drive adjustment 536918300 Craftsman Craftsman 24 inch snow thrower

A:

It sounds like the belt may be sitting too far into the pulleys. This would be caused by the wrong belt (not your situation) or the pulleys starting to spread out (wear out). You can try putting just a little bit of WD40 onto the inside of the belt to see if that will allow it to slip when the machine should not be moving. If that does not remedy the problem, you may want to look at replacing the pulleys.

Thank you for using Manage My Life!

Read More
Wade_B -
Sears Technician
October 24, 2013