Model #536918000 CRAFTSMAN Snowthrower

  • Handle Assembly
    3 Results
  • Wheel Assembly
    3 Results
  • Chute And Impeller
    3 Results
Find part by diagram >

Question and Answers

Q:

craftsman snowthrower 536.918000

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina -
October 27, 2012
A:

You might be out of luck Ask & Answered at link below.

Read More
Anonymous -
October 27, 2012
A:

I'm afraid we do not have a copy of this manual on file and I show the manufacturer no longer has it in print either. You may need to search around the internet to see if you can find a manual for it. Often, this sort of thing will come up on Ebay for bids.

Thank you for using Manage My Life!

Read More
Wade_B -
Sears Technician
October 28, 2012
A:

Do you have installation instructions for the auger pulley belt for the snow thrower 536.918000? Is there another snow thrower that is similar to this that I can look to for any instructions? Any help is appreciated.

Read More
James -
November 01, 2012
A:

As Wade stated on 28 Oct - There is not a copy of this manual on file and It shows the manufacturer no longer has it in print either. You may need to search around the internet to see if you can find a manual for it. Often, this sort of thing will come up on Ebay for bids. A long shot might be at the link below .

Read More
Anonymous -
November 01, 2012
A:

I have a good copy of the manual for the 536.918000 snowthrower. I am willing to make a copy of it for $10.00. I will mail it since it is 21 pages long. Please include postage. call me at 740-927-9219 or email me at Hsmith19@insight.rr.com to get my address.

Read More
Hal -
January 07, 2015
See more answers
Q:

how do I start without a key 536918000 Craftsman Craftsman 20 inch snow thrower

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with washer. Upon researching model 536918000; you would need to use the key to start the unit being that it is a safety feature. If the gas is old it will be best to drain it as fuel degrades at about three months. If you’re not getting any spark then check the spark plug to see if it’s corroded with gas. Starter fluid is mainly used to test the carb and would be put in the carb float bowl.

Thank you for choosing Sears. We appreciate your business. Have a great day.    

Read More
Jeff Wallace Jr -
Sears Technician
November 17, 2014
Q:

What is the fuel /oil mix ratio on my Craftsman snow thrower model 536.918000?

A:

first check the top of the gas cap for instructions on mixing; if you don't have a separate fill pipe for oil filling you need to mix

Read More
dicktar -
February 14, 2010
A:

Your snow thrower has a 4-cycle engine. A 4-cycle engine does not mix the oil and gas. I have provided you with an exploded view of the engine. The red arrow is pointing to the oil fill. The oil level should be about mid way up the threads. Your engine uses 5W-30 engine oil. Please resubmit your question if you need further assistance.

Read More
Mark T Personal Solutions Manager -
Sears Technician
February 16, 2010
A:

I have the 536.918000 Craftsman model code 9162 by sears. I don't have the rear housing with the key. I am not really sure how to get past that. I am not getting any fire and the gas is old. Can I use starting fluid and where do I put it on this model

Read More
Jeremy -
November 16, 2014
See more answers