Model #536886190 CRAFTSMAN Snowthrower, Gas

  • Engine Assembly
    3 Results
  • Electric Start Assembly
    3 Results
  • Handle Assembly
    3 Results
  • Discharge Chute Assembly
    3 Results
  • Auger Housing Assembly
    3 Results
  • Gear Case Assembly
    3 Results
  • Drive Assembly
    3 Results
  • Frame Assembly
    3 Results
  • Wheel Assembly
    3 Results
  • Shift Yoke Assembly
    3 Results
  • Chute Control Rod Assembly
    3 Results
  • Decals
    3 Results
Find part by diagram >

Question and Answers

Q:

snowblower 536.886190 drive belt wont stay on 536886190 Craftsman 8.5 hp 26

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your snow thrower. Upon researching model 536.886190; check the tensioners. Make sure the springs and pulleys are not worn. The tensioner spring can usually wear out and cause the belt to slip or jump.

Thank you for choosing Sears. We appreciate your business. Have a great day.    

Read More
Jeff Wallace Jr -
Sears Technician
February 25, 2015
Q:

Auger doesn't turn under load, possible stripped gearbox. What parts should I be looking at to replace? 536886190 Craftsman 8.5 hp 26

A:

Thank you for your question to SearsPartsDirect.com and for being a valued member.

I apologize your experiencing problems with the Auger on your Craftsman Gas Snow thrower  536886190.

If the gear box is stripped I would take a look at both the Impeller worm shaft and worm gear.  The Impeller drives the Impeller worm shaft which then moves the worm gear. When the worm gear turns that will move the augers

On the Gear Case Assembly diagram the Impeller worm shaft is key number 321 and the worm gear is Key 315.

 

Click here

 

Thank you for choosing SearsPartsDirect.com. We appreciate your business. Have a great day!

Read More
Ashley 22 -
Sears Technician
February 24, 2015
Q:

Part number: 1740718AYP (Skid, height adjust.) 536.886190

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about the part for your Craftsman snow thrower model 536.886190. I am so sorry the skid height adjuster needs to be replaced. This part is sold individually so be sure to order two of them. I have included the link below for your to order the part.

I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
February 02, 2015

Top Parts