Model #536885921 CRAFTSMAN Snowthrower, Gas

  • Handle
    3 Results
  • Chute Control Rod
    3 Results
  • Discharge Chute
    3 Results
  • Auger Housing
    3 Results
  • Headlight
    3 Results
  • Electric Starter
    3 Results
  • Frame
    3 Results
  • Engine Components
    3 Results
  • Drive Components
    3 Results
  • Track
    3 Results
  • Gear Box
    3 Results
  • Decals
    3 Results
  • Control Panel
    3 Results
Find part by diagram >

Question and Answers

Q:

replacing spring on brake arm rod 536.885921

A:

It sounds like you may have the tension spring clipped in the wrong area on the frame. That parts drawing may be deveiving in regards to the spring connection on the frame. I recommend that you examine the frame for a closer connection point that has some evidence of wear to see if you can find the correct place to connect that spring. Make sure that your belts are routed and adjusted correctly.

Read More
Lyle W -
Sears Technician
December 11, 2014
Q:

Replacing Brake pad on the Brake arm of my snowblower 536.885921

A:

Thanks for the inquiry and for being a valued member.

You are correct; the spring pin will more than likely need to be tapped into place with a hammer. Sometimes if you move the brake arm rod up and down a little while pushing the pin in, it will make it a little easier. However, if the pin feels tight and doesn't want to go through brake pad and rod, it will need to be tapped in.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
December 09, 2014
Q:

Tension Spring 536.885921

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your snow thrower and I do understand your frustration. Glad to help out. I'm looking at your model number 536885921 and it attaches to the frame of the machine. I have included an image of the diagram and outlined the section it goes. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
November 26, 2014
A:
Sherman_G_Wallace -
Sears Technician
November 26, 2014
See more answers