Model #536884821 CRAFTSMAN Snowthrower, Gas

  • Handle Assembly
    3 Results
  • Chute Control Rod
    3 Results
  • Discharge Chute
    3 Results
  • Auger Housing
    3 Results
  • Belt Cover
    3 Results
  • Frame Components
    3 Results
  • Engine Components
    3 Results
  • Drive Components
    3 Results
  • Track Assembly
    3 Results
  • Gear Box
    3 Results
  • Decals
    3 Results
  • Shift Yoke
    3 Results
Find part by diagram >

Question and Answers

Q:

Have a model 536.884821 snow thrower. Purchased a replacement Carb. Where are the Adjustment screws and what are the settings? 536.884821

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your snow thrower. Upon researching model 536.884821; the carb is not adjustable. It has a fixed low idle and main jet.

Thank you for choosing Sears. We appreciate your business. Have a great day.    

Read More
Jeff Wallace Jr -
Sears Technician
January 22, 2015
Q:

belt replacement

A:

I think its great that you are wanting to do some repairs on your own and I will be happy to help. I did some research and I was able to find a link with a similar question. I am also adding a second link in where you can view the owners manual for your snowthrower. I hope this helps with your repairs while you wait for your expert response.

Read More
Joseph P. -
December 04, 2012
A:

Thank you for your question about replacing the drive belts on the snow-thrower.

I am sorry but I do not have a service manual but I have given you the instructions on the belt replacement process.

You will need to remove the lower belly pan on the drive housing.

To gain better access to the belts you can remove the top two bolts on either side of the chassis that secure the blower housing to the drive housing. It will then pivot on the bottom two bolts and open up the area for the drive belts.

I hope this will help with the instructions below.

Sam A.

Read More
Sam A -
Sears Technician
December 05, 2012
See more answers
Q:

What year is my snowblower

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
aashe -
October 30, 2011
A:

Thank you for your question.

I will be happy to assist you. I have looked up the model number you have submitted. This is a 1991 snow blower.

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
October 30, 2011
See more answers

Top Parts