Model #536884820 CRAFTSMAN Snowthrower, Gas

  • Handle Assembly
    3 Results
  • Motor Mount Frame
    3 Results
  • Auger Housing
    3 Results
  • Track Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

Snowblower parts 536884820 Craftsman Snowthrower

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

 I am sorry and do understand your frustration when needing parts for the engine.

Glad to help out.   Im  looking at your model number off the snow blower 536.88482 and that brings me the original engine off of a "TECHUMSEH ENGINE" model HS50-67329k.

Please take a look at the engine because it is showing me a techumseh when you have stated it is a Briggs and Stratton model.   I can help out with this engine here but if you have a Briggs engine then I will need the model number off it please to assist you.  Both models the second one 536.886530 also had the same engine, a Techumseh.  Model HS50-67326k different specs on the engine model number also.

 If you have further questions please let me know.

Thanks for choosing Sears PartsDirect.com


 

 

 

Read More
Larry L -
Sears Technician
November 04, 2013
A:

That's okay, I appreciate your effort to help me find the parts I am looking for. Unfortunately it is not a Tecumseh engine but I can give you the block number as well as some numbers that are printed on the parts themselves. I do not currently have them but I will send them to you as soon as I can.

Read More
Michael -
November 05, 2013
See more answers
Q:

Dark Black Fluid coming from my snowthrower

A:

It can be very frustrating when your snowthrower starts leaking a dark black fluid. While you are waiting for your expert answer, I did some research on the unit. At this time, I was unable to locate information that would be helpful in regards to your question. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner.

Read More
Julio -
January 12, 2013
A:

Hello Randy,

I am sorry to hear that your snow thrower is not moving correctly and I would like to assist you. The drivetrain in your snow thrower does not use any hydraulic parts and the black fluid was likely to have come from the friction disk or one of the other associated parts. Be sure to unplug the spark plug prior to servicing the snow thrower. Drain the fuel out of the tank and then flip the unit up on the front for access to the drive parts of the transmission. Remove the bottom cover from the bottom of the chassis and you will be able to see the friction wheel and the large pulley that it rides on. Inspect it for damage to the rubber wheel that is mounted to the disk. I have attached a diagram that shows the parts in an exploded view for your assistance.

Please let me know what you find and I'll be happy to further assist you.

Jerry C

Read More
Jerry C -
Sears Technician
January 14, 2013
A:

The image did not display correctly, re-attached on this post.

Jerry C

Read More
Jerry C -
Sears Technician
January 14, 2013
See more answers
Q:

I have a snow blower, model 536-884820. I need to know what kind of oil it uses and how much. I can't get a manual.

A:

Your snow thrower uses 30 wt motor oil when running at 32 degrees or above. Below 32 degrees the snow thrower uses 10W30 motor oil. The amount of oil the engine uses is around 20 ounces. It is best to fill the engine with oil while checking with the dip stick. Fill the engine to the full level on the dip stick.

Read More
Jimmy K -
Sears Technician
November 04, 2009