Model #536884581 CRAFTSMAN Snowthrower, Electric

  • Electric Start Assembly
    3 Results
  • Engine/drive Assembly
    3 Results
  • Frame Assembly
    3 Results
  • Control Panel
    3 Results
  • Belt Cover Assembly
    3 Results
  • Discharge Chute Assembly
    3 Results
  • Auger Housing Assembly
    3 Results
  • Wheel Assembly
    3 Results
  • Handle Assembly
    3 Results
  • Decals
    3 Results
  • Chute Control Rod Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

Starter Rope broke 536884581 Craftsman Snow thrower

A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your snowthrower
and do understand your frustration. Glad to help out. Im looking at your model number 536884581 and the install is fairly easy. I have included a video that will help as well. Click here for video. Hope this information helps. 
 
If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com
 

Read More
Sherman_G_Wallace -
Sears Technician
February 13, 2014
A:

What is the replacement part number?

Read More
Christine -
January 15, 2016
See more answers
Q:

does this blower have an air filter 536884581 Craftsman Snow thrower

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about whether your Craftsman snow thrower model 536884581 uses an air filter. I will be happy to help you with this.

At one time our snow throwers had air filters on them. However, it was soon realized that the filters would become clogged with snow and ice. This would restrict the air flow to the engine causing it to overheat. Also, there isn't any dust that can clog the engine when you are blowing snow. For these reasons the air filters were removed from snow throwers as no longer necessary. 

I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
January 27, 2015
Q:

It dosen't work 536884581 Craftsman Snow thrower

A:

Thanks for the inquiry and for being a valued member.

I am sorry to hear that the engine is stalling when under load. I know how frustrating that is to have happen.

I suspect the issue is with fuel. Namely, the main jet within the carburetor is more than likely blocked, which is starving the engine of fuel when it goes to clear the snow under load. 

I would pull the carb from the engine. With a full can of carb cleaner, a wire brush, and a bread tie wire to poke through and clean the main jet; I would recommend a very thorough cleaning. Start by taking off the float bowl. Douse it very liberally with carb cleaner, and undo the pin for the float, and remove the needle and float. Clean them very thoroughly with the wire brush and carb cleaner. Pay close attention to the seat the needle sits in and clean it well. Once clean, start brushing the carb bowl and body and make sure you get all the varnish out. It may take three or four brushings with carb cleaner dousing in-between. From there, take the straw of the carb cleaner and shoot carb cleaner through any little hole or passageway of the carb. Shoot out the throat of the carb and poke the main jet with the bread tie wire. You have to make sure you get everything the first time, if you leave anything behind, it’s likely to reclog once you have it reassembled.  

I do not see a rebuild kit available for the carburetor, but the parts are listed individually depending on what you would need. If you decide to replace the entire carburetor, the part number is 640341. In order to see the Tecumseh engine parts list, including the carburetor schematic, you need to input the engine model number into Sears Parts. The Tecumseh engine model is 143.632714.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
December 23, 2014