Model #536884300 CRAFTSMAN Snowthrower

  • Main Frame
    3 Results
  • Auger Housing Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

craftsman snow blower carburator and linkage diagram

A:

I can understand how a diagram will help with the repair on the Craftsman snow blower. The link provided below may be helpful while an expert responds with additional information. I you decide on service, that link is also provided below.

Read More
Anna T -
December 28, 2012
A:

Hello!

I know these repairs can be a bit tricky and the diagrams help a lot. I can get that for you! Below I have included a link to view the engine parts and here you will be able to find the information you need. The carburetor in this diagram is key number 89, and the link is key number 20. Thanks for choosing Sears and you have a nice day! -Melody
 

Read More
Melody D -
Sears Technician
December 28, 2012
A:

I am looking for the manual and a carburetor or carburetor kit for my Craftsman Snow thrower model 536.884300, 3/20 ES. Can anyone help me obtain these items or tell me where I can find them myself. Thanks much.

Read More
Diann -
November 01, 2015
See more answers
Q:

What type of gas does this snow thrower use? 536884300 Craftsman Craftsman 20

A:

Thanks for the inquiry and for being a valued member.

This Craftsman engine 200.663111 made by Tecumseh is a 2-cycle engine and will take a 40:1 fuel/oil mixture. I have linked the applicable service manual below for the engine. The fuel/oil mixture ratio is mentioned within the first pages of the manual.

Service Manual

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
May 11, 2015
Q:

Craftsman Snowblower 536884300 flange bearing

A:

I understand your concern toward wanting to get another part for your snow blower and I will be happy to help. While you are waiting for an expert answer, I did manage to find a link in where you can enter your model number and a parts list diagram will pop up: http://www.searspartsdirect.com/partsdirect/index.action. I hope my link is useful.

Read More
Joseph P. -
November 03, 2010
A:

Hi djrm, i ripped an auger out of one of those flange bearings while "unplugging" the xmas lights with a single stage 2-cycle 'thrower a few years ago. Maybe a little rust on the auger's driveshaft. Have you tried lithium grease to lube it?

Read More
madgolfer -
November 03, 2010
A:

i did try the searspartsdirect website that was how i got the original part shipped it also appears that the shaft is not going in 100/percent into the bearing maybe 90 but i definitely will try the lithium grease to see what happens. It just doesnt make sense as to why they would sell a plastic vinyl bearing to have a shaft rotating so fast causing the boring therefore wasting out the plastic On the pulley or belt end it appears that there is a metal type bearing (plate bearing no. 583459MA) that doesnt run down. I was wondering if there was a part similiar that might work

Read More
djrm122 -
November 03, 2010
A:

The 577023MA bearing is the only bearing listed that will work for this. It has been my experience that there is almost always something else out there that will work. But trying to track something like that down is almost impossible unless you just happen to come across a similar application using another part.

I don�t show that this part is a high usage part so there may be something else going on causing it. Something like that should be easy enough to see though. It could also be because the machine is older so there just aren�t many of them out there anymore.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
November 04, 2010
See more answers