Model #536884231 CRAFTSMAN Snowthrower, Gas

  • Handle Assembly
    3 Results
  • Chute Control Rod
    3 Results
  • Discharge Chute
    3 Results
  • Auger Housing
    3 Results
  • Belt Cover
    3 Results
  • Frame Components
    3 Results
  • Engine And Drive
    3 Results
  • Frame Components
    3 Results
  • Wheel
    3 Results
  • Decals
    3 Results
Find part by diagram >

Question and Answers

Q:

What is the carb setting for a model number 200711001 engine?

A:

To adjust the needles on the carburetor, turn both screws clockwise until they bottom out. Back each screw out 1 1/2 turns and the engine should start and run.

With the engine running at high speed adjust the high speed screw out (counter clockwise) until the engine runs rough or dies. Then adjust the screw clockwise until the engine smooths out.

Set the engine to idle and adjust the idle screw the same way.

Each engine has to be adjusted to find the setting it runs best on. There is no preset spot for the carburetor needles.

Read More
Jimmy K -
Sears Technician
December 23, 2009