Model #536884210 CRAFTSMAN Snowthrower

  • Main Frame
    3 Results
  • Auger Housing Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

Engagement of auger 536884210 3/20 Snow thrower

A:

Good morning.... That pin is where we will likely put our focus. I have provided a link below that is very brief but will address your suspicion. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this link will help guide you as to what might be wrong with your snow blower and have a nice day

Read More
Henry -
January 18, 2013
A:

Thank you very much

Read More
Pete -
January 18, 2013
A:

I agree; the diagram is very hard to read. I'm afraid the part in question (actually looks to be a nut/bolt) is no longer in production. I cannot get a good enough drawing of this to tell how everything is actually attached, It looks like the bracket where the pin is, has the pin going through it. Making me believe that the pin is its own part, but I do not see a listing for a pin. If they used a bolt for a pin, that would make sense. But the drawing is not clear and so many of these parts are no longer in production. Since it is the pin that is broke on yours, you may be able to drill what's left of it out and then just put a bolt in it's place and connect the cable up to that on the lower end.

Thank you for using Manage My Life!

Read More
Wade_B -
Sears Technician
January 19, 2013
See more answers