Model #536882502 CRAFTSMAN Snowthrower, Gas

  • Handle Assembly
    3 Results
  • Engine
    3 Results
  • Auger Housing Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

How to remove the fuel fitting from the carb on craftsman 536882502 snowblower 143754112 Craftsman Craftsman 4-cycle engine

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your snow blower and I do understand your frustration. Glad to help out. I'm looking at your model number 536882502 and it is pressed into the carburetor. Here is a link for a video that will help removing the fitting. This is a bit of a complicated problem in that there is no tool or known "easy" way of taking care of this problem.

I have seen the following method used many times: Use a 1/4 self-tapping screw, run a nut up onto the screw about halfway. Use a 5/16 nut to pry on, and get the screw started into the center of the press fitting until you get a good, solid bite. Turn the 1/4 nut onto the larger nut and it will act as a pry point and actually pull the fitting out. Once you've gotten it out, put the new fitting and carb into a shop vice and apply steady even pressure on the fitting and face of carb until it squarely presses the fitting into the press-in port. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
November 24, 2014
Q:

looking for a model 536.882502 snow blower not thrower manual 536.882502

A:

Thank you for choosing Sears Parts Direct. I can certainly assist you. I did look into the model number you have provided, and I keep pulling up the snow thrower. If you got the model number off of the unit then that is the correct diagram. I recommend checking the snow blower for the model number. If the diagram is wrong you will need to contact 18004MYHOME and speak to our customer care department so they can submit a research on the diagram.  

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
July 30, 2014
Q:

Carburetor 536882502 Craftsman Craftsman 22 in-5 h.p. snow thrower

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
Based upon snow thrower model 536.882502, the engine being used is a Tecumseh engine and model 143.754112.  Based upon the engine model, it looks like the entire carburetor assembly is no longer offered, but the rebuild kit is still available. The part number is 49-840.
For convenience, I have included a blue link below that you may click on to be directed to the PartsDirect site to view and purchase any of the engine parts.

Tecumseh Engine Parts for Model 143.754112

Let us know if we can be of any further assistance and thanks for using SearsPartsDirect.com.

Read More
Jeff Wallace Sr -
Sears Technician
March 03, 2014