Model #536292521 CRAFTSMAN Cultivator

Find part by diagram >

Question and Answers

Q:

My Tiller is no longer on sears pars web site

A:

The tiller is great for working around the yard. I found a model similar to yours here:[Craftsman Cultivator Model 536.292521]. I am hoping that this will help you out until your expert answers your question. It may take two business days for your expert to reply. I do hope that everything works out.

Read More
Marc -
July 08, 2013
A:

Thank you for choosing ManageMyLife.com. I understand how important it is to be able to get the correct tines for your tiller. You're model number appears correct. Sometimes, if the model number ends in zeros, you will not have to input the zeros, which in this case is true. I have included a link to our PartsDirect page where you can purchase the parts you need to complete your repair. Just click the blue link below to be taken to the page.
Craftsman Cultivator Model #536292521
If you have further questions please let me know. Thanks for using ManageMyLife.com.

Read More
Desirea -
Sears Technician
July 09, 2013
See more answers
Q:

Craftsman Cultivator Tines will not turn

A:

I think you may be close to the truth mentioning the clutch. If the engine is running fine but the tines do not turn the problem would be a defective gear case or clutch. To determine which one is bad you need to separate the engine from the gear case. I did locate a link that will discuss your situation in greater detail. Though this link discusses a different model number, the mechanics are likely going to be very similar. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this link will help guide you as to what might be wrong with your tiller and have a nice day.

Read More
Henry -
May 03, 2013
A:

Thank you for your question. 

I am sorry you are having a problem with the tiller. If the engine is running fine but the tines do not turn the problem would be a defective gear case or clutch. To determine which one is bad you need to separate the engine from the gear case. To separate the two, just remove the four bolts holding them together. Once it is apart, turn the shaft going into the gear case. If the tine turns when you turn the input shaft, the problem is likely the clutch. If the tines do not turn the problem is the gear case. The parts for the tiller can be ordered from the following link. Replacement parts for Craftsman tiller model  536.292521. 

 

I hope this is helpful. Please let me know if you need further assistance. Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
May 06, 2013
See more answers