Model #536270290 CRAFTSMAN Lawn, Riding Mower Rear Engine

  • Chassis & Hood
    3 Results
  • Steering
    3 Results
  • Motion Drive
    3 Results
  • Mower Housing Suspension
    3 Results
  • Mower Housing
    3 Results
  • Electrical System
    3 Results
  • Decals
    3 Results
Find part by diagram >

Question and Answers

Q:

Battery removal Craftsman model 536270290 536270290 Craftsman Mid-engine rider

A:

Thank you for your inquiry on your Craftsman Riding Mower, Model: 917.370930. From reviewing the details on your model, it appears that the only information we have on changing the battery is what’s in the manual. 

Safety Warning: Before beginning the repair, disconnect the direct power supply to the riding mower to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.

 

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
May 14, 2015
Q:

model # 536270290 tractor

A:

I understand that your tractor does not engage. I have taken some time to research your question here on the Manage My Life website and I was able to locate a similar question to yours. I attached the link below for you to view while you are waiting on your response from an expert. I hope the link that I provided gets you one step closer to repairing your tractor. Have a great day.

Read More
Alina F. -
July 29, 2011
A:

If you had one of the rear wheels off recently it's very possible that the wheel key did not make it back in the keyway. If that is not the case then there is an internal problem with the transmission causing the problem. I do not recommend opening the transmission up for repair unless you're pretty sure you can do the job.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
July 30, 2011
See more answers
Q:

I need the correct wiring diagram for my tractor!!

A:

Below is the previous answer I sent you yesterday. If you will disregard the orange wires to the safety switches and use the yellow ones, the wiring diagram you have is correct for the mower. This problem is usually caused by the connector that goes to the seat switch. If you examine the connector you will see a small plunger that is activated when the connector slides on the switch terminals. This plunger should open the built in grounding circuit that is inside the connector.

Read More
Jimmy K -
Sears Technician
September 10, 2009

Top Parts