Model #536257670 CRAFTSMAN Lawn, Tractor

  • Chassis And Hood Assembly
    3 Results
  • Chassis And Hood Assembly
    3 Results
  • Mower Suspension Assembly
    3 Results
  • Front Steering Assembly
    3 Results
  • Rear Steering Assembly
    3 Results
  • Motion Drive Assembly
    3 Results
  • Motion Drive Assembly
    3 Results
  • Engine And Control Assembly
    3 Results
  • Pre-painted Deck Assembly
    3 Results
  • Final Deck Assembly
    3 Results
  • Electrical Assembly
    3 Results
  • Wiring Schematic
    3 Results
  • Decals
    3 Results
  • Transaxle
    3 Results
  • Tread Patterns
    3 Results
Find part by diagram >

Question and Answers

Q:

How do I adjust my tractor for the all-wheel steering to work properly?

A:

Most of the steering mechanism on this model is not user serviceable. You can check all the moving parts of the steering assembly for movement and grease/oil where necessary. Unfortunately the all-wheel steering design on this model is complicated and I do not recommend the user attempt to service them outside of general maintenance and adjustments.

Read More
Lyle W -
Sears Technician
April 17, 2009
A:

After making a hard left turn it is extremly difficult to get the steering to get out of the turn. I really need to make some type of adjustment as both right and left turns are made all the time. What kind of adjustment might help things? Like replacing a ball joint or tie rod? I need to do something.

Read More
dale -
July 27, 2012
See more answers
Q:

Will this fit my sears riding mower?

A:

Needing to know if your Sears riding mower will attach to the snowblower you have. While you are waiting on an expert to answer your question, a suggestion I have is to visit Sears Parts Direct website to speak with a Sears associate. I have attached the link below. Hope this helps!

Read More
Dezeray S -
May 10, 2011
A:

Thank you for your question. I have checked the model numbers you have submitted. I am sorry those two models are not compatible. The snow blowers I show for your tractor are models 486.24839*, 486.24838*, and 486.24837*. You can purchase model 24837 form our website: Sears.com | http://www.sears.com/shc/s/p_10153_12605_07124837000P?prdNo=7&blockNo=7&blockType=G7&MML=MMLxexpertxmerch ] .

Please let me know if you need further assistance with the tractor.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
May 11, 2011
A:

What snowplow models will fit my riding mower?

Read More
davbell25413 -
June 24, 2011
A:

Thank you for the reply. The snow blade models I show for your tractor are 486.24441 and 486.24443. Please let me know if you need further assistance.

Read More
Mark T -
Sears Technician
June 25, 2011
A:

What about a snow thrower off a LT1000?

Read More
davbell25413 -
June 25, 2011
A:

It most likely fit but I will need the model number of the snow blower to be sure.

Read More
Mark T -
Sears Technician
June 25, 2011
A:

Ok, The owner is looking for the model. Here's pic of it til i get the model number.

Read More
davbell25413 -
June 25, 2011
A:

Nevermind the seller wants way too much money for it.

Read More
davbell25413 -
June 25, 2011
A:

Will this plow fit my mower? 486.244280

Read More
davbell25413 -
November 26, 2011
A:

I don't believe that one will work with your tractor. The frames changed between when the snow thrower was made (1994) and when your tractor was made. It's also a little bit big for your tractor as well.

Read More
XX Wade_ -
Sears Technician
November 28, 2011
See more answers
Q:

solenoid

A:

It is always a great idea to double check what could be the main problem with your lawn mower. I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below for you to view. I hope the link that I provided is helpful. Have a nice day.

Read More
Alina F. -
August 05, 2011
A:

If you check for power at the starter while trying to start the engine you should have voltage there (battery voltage). If you do not, then there is a problem with the solenoid or a safety switch. If you do have power there but the starter does not spin, remove the spark plug and then see if it will spin. If it does there may be a stuck valve or it could very well be the starter (we can check for that). If it still does not turn over when the spark plug is removed then the starter is bad.

All you need to check that out is a basic volt meter that will read DC voltage. If you do not have one there really isn't a way to effectively check the starting (or charging) system.

Let me know what you find and we can proceed as necessary.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
August 05, 2011
A:

i havent checked it with a volt meter yet it is in my sons car but i cleaned the battery terminals and the ones on the solenoind and put it all back together and i think it is the started but what ever it is it started smoking why would this happen

Read More
karen -
August 11, 2011
A:

It was smoking at the starter? Did you hold the key down for several seconds trying to get it to start? Take the spark plug out of the engine then turn the key to see if the engine will spin. Do not hold the key down for more than about 3-4 seconds. If nothing happens then let off of it. The reason for that is if the starter is jammed (not able to turn) and you keep holding the key down the starter is going to basically fry, we don't want that if we can help it. Let me know if the engine will turn over with no spark plug. Also with the spark plug out, try to turn the engine by hand. Let me know on both of those things what you find.

Read More
XX Wade_ -
Sears Technician
August 11, 2011
See more answers

Top Parts