Model #53000 HONEYWELL Air Cleaner

  • Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

cannot find right replacement remote for old 139.53627SRT garage door opener 13953627SRT Craftsman Garage door opener

Q:

rinse cycle/cold water, cold warer not coming in, even though i can still hear timer dial working, need to know what to check? AAV7000AWW Admiral Admiral laundry

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your washer's cold water is not working.

You will need to check the water valve with an OHM meter. If that checks out good then you would need to test the temperature switch.


 
Unplug washer, disconnect harness and test resistance 

from wire insertion side of harness. 
(Hot valve) Pin #9 PK of PS5 and Pin #3 OR of PS5.
(Cold valve) Pin #7 PU of PS5 and Pin #3 OR of PS5.
(Thermistor) Pin #1 GY and Pin #11 GY of PS5.

1120 ohms 
1120 ohms 
53000 ohms @ 70F 

Console Disassembly
1. Disconnect power supply to unit.
2. Remove Cycle Selector Knob and Switch Knobs.
3. Remove three screws along the top of the Console
and roll the Console forward.
4. Disconnect and remove Rocker Switches from
Console.
5. Disconnect all wiring harness connectors from the
Circuit Board.
NOTE: Wear an Anti Static Wrist Strap and ground
yourself before working with Electronic Control
Boards. Always handle boards by the edge and don’t
touch discreet components.
6. Depress the PCB locking tab and remove Circuit
Board.
7. Remove Switches by lifting locking tab and rotating
Switch to align with hole molded in Console.

Top Cover Removal
1. Disconnect power supply to unit.
2. Insert a plastic putty knife between the Top Cover and
Front Panel. Press the locking clip to release the Top
Cover. Repeat for both sides. Support lid with free
hand and rotate top until it comes to rest on hinge
stop.

Water Valve Removal
1. Disconnect power supply to unit.
2. Lift Top Cover, see “top Cover Removal” procedure.
3. Remove retaining screw on back panel.
4. Lift Water Valve to align with cutout in back cabinet.


You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
June 17, 2015
Q:

options for wall controls for garage door openers model 139.54918

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your garage door opener and I do understand your frustration. Glad to help out. I'm looking at your model number 139.54918 and it is possible that the controller will work and should connect the same as the original. Click here for the wiring instructions for the original console that may help connecting the new console or if the console came with instructions verify the wiring and the wiring that you have available. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
January 17, 2015
A:

Hello! Doing some looking around, would a 041A7187 wall control from a 139.54985 door opener work as a second wall unit with my 139.54918 door opener. Thanks very much for your help! Chuck

Read More
charles -
January 17, 2015
See more answers