Model #53 HOOVER Attachments (Vacuum)

  • Hose, Cleaningtools
    3 Results
  • Motor Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

Why doesn't model # 53.6.886280 have a PDF owner's manual available for download? 536886280 Craftsman 8hp 26

A:

Thank you for your inquiry on the Craftsman Snow Thrower, Model: 536.886280. On reviewing the model, it appears that the Owner’s manual is not available for this model due to the age of the snow thrower the manufacturer does not have the manual on record anymore.
 
I hope this answered your question. Thank you for choosing SearsPartsDirect.com and have a wonderful rest of your day.  

Read More
Gerry93 -
Sears Technician
January 29, 2015
A:

yes, it helps but it sucks!!!

Read More
Cesar -
January 25, 2016
See more answers
Q:

417.88042700 Error code instructions 41788042700 Kenmore Dryer

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your dryer is not working properly. 

You will need to count how many times they blink. I have attached the information to read the error codes. 
I have also attached the error code sheet so you can locate your error code and what it means. 

READING ERROR CODES 
1. Non-Digital Readout Display Models: Rotate cycle selector knob to the 3 O’clock position. 
 Digital Readout Display Models: Rotate cycle selector knob clockwise (3) settings from the Normal cycle option. 
2. Press and hold the Select and Pause Cancel buttons simultaneously for six seconds. 
3. Immediately after, press and hold the START and Pause Cancel buttons simultaneously for 4 seconds. 
4. Digital Readout Display Models: rotate the timer knob (1) click counterclockwise. The error code will appear in the digital display. 
 Non-Digital Readout Display Models: rotate the cycle selector knob to the 2 O’clock position. The four indicator lights of Drying, Cool Down, Wrinkle Rid (Press Saver), and Clean Lint Filter will flash the number of times for the first digit of the code and the START indicator light will flash the number of times for the second digit. Take separate counts of each indicator light, then repeat to confirm in order to be accurate in identifying the proper error code. The code is obtained by counting the number of times the lights flash. Example E24: The four indicator lights would flash twice indicating the 2 
and the START indicator light will flash four times indicating the 4. The four indicator lights and the START indicator light start flashing at the same time. The control will pause for 2 seconds, then repeat the code. 
 NOTE: A letter appearing in the code stands for a number higher than nine. A = 10 B = 11 C = 12 D = 13 E = 14 F = 15 
 Example Code E4A: the first digit would be 4 and the second digit would be 10. If this code would appear on a washer in the Non-Digital Readout Display Models, the four indicator lights would blink four times and the START indicator light would blink ten times. Troubleshoot the problem by using the chart below. 
To move on to the next code, press the OPTIONS button. 
To clear code, press the Select button. Code will be cleared when mode is exited. 
To exit this mode, simultaneously press and hold the Select and Pause Cancel buttons for six seconds. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
June 08, 2015
A:
Natasha12 -
Sears Technician
June 08, 2015
See more answers
Q:

Pump Oil - Do not service for life of pump? 580752050 Craftsman Pressure washer

A:

Thanks for the inquiry and for being a valued member.

Due to this being a sealed pump, the manufacturer (Briggs&Stratton) has not released the pump oil capacity. Typically they are between 4.6 to 5.3 ounces. The pumps use a special blend of synthetic pump oil. 

For convenience, I have linked the pump oil below. Just click the link to be directed to the page to view and purchase when needed.

Pump Oil for Model 580.752050

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
October 13, 2014
A:

I only see one drain plug, the plastic allen key plug at the bottom. I do not see any fill-level bleed screw. Does the pump unit get filled up full, or should I measure and put in about 5 ounces?

Read More
Stephen -
October 13, 2014
A:

This link is not valid any longer. Could you share the correct link for the pump oil for this model pressure washer?

Read More
David -
December 31, 2015
See more answers