Model #5202 PORTER CABLE Router

  • Router
    3 Results
Find part by diagram >

Question and Answers

Q:

looking for a router motor Model 5202 it is an old one and if anyone knows a different model or manufactures that can be replaced with. 5202

A:

Thanks for the inquiry and for being a valued member.

Unfortunately, these earlier router motors are no longer being produced. The early style motor barrels were 4.5" diameter, whereas the newer styles are 4.2" diameter. 

You can plug "Router Motor 5202" into Ebay, it looks like there are some refurbished ones available. Outside of that, you can take the motor to an electrical supply/repair shop locally to have it refurbished. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
April 19, 2015
Q:

What does error code F1 mean on my Kenmore Gas Slide in Oven model number 9113042591?

A:

The F1 error code indicates a failed transistor in the control. If the control cannot be reset after disconnecting & restoring power you will need to replace the EOC (clock) WB27K5202R www.searspartsdirect.com

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
biker dave -
Sears Technician
May 18, 2010
A:

That phone number is a dental office. How does one get a list of error code meanings? The part you named is not listed as such ERC. Sears has no ideas what that is. But they have a timer control and and various components, could you be more specific?

Read More
david -
November 01, 2011
A:

Wait your entry just changed from before. Now you call it an EOC and say its a transistor? and give a part number. Great. But I wanna be sure I dont a part for nothing, RU sure about part this time? Or I better wait to see if it changes again?

Read More
david -
November 01, 2011
See more answers
Q:

My built in oven that came with house is a Kenmore model# 911.3042992. not sure how old is, is it worth repairing? F 1 is flashing even after resetting.

A:

On something like this you’re going to need to replace the EOC (clock) part number; WB27K5202R www.searspartsdirect.com $133.99, if you decide on the repairs. Please see the error codes listed in the image provided for more information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
biker dave -
Sears Technician
May 25, 2010