Model #5060 PORTER CABLE Router Accessory

  • Stair-ease Stair Template
    3 Results
Find part by diagram >

Question and Answers

Q:

need replacement capacitor for motor on table saw 113.299410 113299410 Craftsman Saw table

Q:

Options for replacing a discontinued part 183-13601300

A:

Thanks for the inquiry and for being a valued member.

I am sorry to hear of the discontinued relay on the chest freezer. I know how frustrating that is to have happen.

Unfortunately,  the manufacturer (Haier) has not supplied a substitution relay for the original. Without a suitable replacement being identified, we do not have one to recommend that would be a guaranteed fit.

The best recommendation would be to run an online internet search for part number RF-5600-02 to see if there are any of the relays still in circulation. From my search, it appears that's a possibility. Outside of that, you could contact the manufacturer directly, or use the specs you have from the original relay to find a substitution at an electrical supply location if possible. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
January 07, 2015
A:

Thanks Jeff, appreciate the response. The internet search is where I was headed, just wanted to make sure I wasn't missing anything. Thanks again.

Read More
John -
January 07, 2015
See more answers
Q:

Lawn mower blade adapter 917.370600

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
A:

Thank you for your reply. I spoke with a local small engine repair technician who said he has seen this frequently with new parts that are made in China. Additionally, he said to make sure there is 50-60 ft-lbs of torque on the bolt - which I had. I decided to put blue Loctite on the bolt when re-installing the blade and torqued as mentioned above. Once cured, I began mowing and every time I stopped to empty the grass catcher I checked the bolt. I was able to mow the entire lawn with the bolt retaining torque. BTW - the owner's manual really gives no detail on installation. I would recommend to all users to clean the bolt before install, place blue Loctite on the bolt threads prior to install, torque the bolt to 50-60 ft-lbs and let cure for 24 hrs. This seemed to solve my problem - at least for now. Thank you.

Read More
Dale -
May 14, 2014
See more answers