Model #5041 PORTER CABLE Paint Removal Kit

  • Paint Remover Attachment
    3 Results
Find part by diagram >

Question and Answers

Q:

wiring diagram needed 91195579891 Kenmore Range

A:

Thanks for the inquiry and for using SearsPartsDirect.com. 

I have located and identified the wiring diagram for this model of Kenmore range. The diagram isn't the most visually appealing, but it should be of help.

Our system is currently not allowing attachments, so to get you the diagram, I have emailed it to you based upon the email address you've provided.

Let us know if we can be of any further assistance and thanks for using SearsPartsDirect.com.  

Read More
Jeff Wallace Sr -
Sears Technician
October 31, 2013
Q:

Kenmore Elite 721.66463 Microwave is blowing fuse.

A:

Microwaves contain high-voltage components that can retain a lethal electrical charge of up to 2200 VAC -- even when the microwave is unplugged. Repairs and adjustments, even minor ones such as , can cause microwave leakage. A microwave shielding leakage test should be performed after any microwave service. It is for these safety reasons that we are unable to guide you in microwave repairs and instead recommend scheduling service with a qualified service technician. please click on the link to schedule service: Sears Home Services. Click on "Get Started" and follow the directions, click on the red "NEXT" button to continue. Please feel free to let me know if you need further assistance. We are always here to help. Thank you for using ManageMyLife.com.

Read More
AnneJ -
Sears Technician
August 16, 2013
Q:

Elements on smooth cooktop heat for 15 seconds and then turn off 9119554590 Kenmore 30" electric free standing range

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Marc -
April 28, 2013
A:

Hi- I'm the person who posted the question. I figured out what the problem was. It wasn't the fact that the elements were powering down. I only noticed that that's what the elements do when I was trying to figure out why I couldn't cook pancakes on the large element this morning. The real trouble was that I never realized that a toggle on the backboard would turn the large element into a smaller element, thus my pancake pan wasn't getting near enough heat. So nothing's broken afterall. Thanks!

Read More
Nancy -
April 28, 2013
A:

Thank you for your question. I can understand your concern about the top burners. This could be a problem with the infinite switches or the limits on the burners. If the proper type of cookware is not used, it can cause the burners to overheat and trip the limit. Make sure flat cookware is being used. It would be very unusual for all 4 switches to go out at the same time but if the burners only heat for this short period and do heat properly when set on high, it would lead to the switches. The switch for the right front and left rear burners is # WB23M24. The left front is # WB23K5041 and the right rear is # WB23M23. These switches are expensive and I would suggest having a technician check this first or just replace one of the switches, to see if the element works properly on medium heat. If you feel confident in your repair skills to safely make some voltage checks, reply to this thread and I will assist you further.

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services.

Read More
Scott D -
Sears Technician
April 30, 2013
See more answers