Model #5031 PORTER CABLE Laminate Trimmer

  • Laminate Trimmer
    3 Results
Find part by diagram >

Question and Answers

Q:

samsung plazma tv the color seems to be going out all i get is yellow black white for colors tried to adjust control but didn't do anything HPP5031 Samsung Plasma tv

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about your television. I am so sorry     the color is going out. I know the TV is a key part of our daily lives and know you want to get it fixed quickly. In this case, I recommend you have the TV repaired by a qualified technician.

We do not give repair advice on televisions because internal components in the TV can retain a dangerously high electrical charge, even when the TV is disconnected from the power supply. Here at SearsPartsDirect.com we love to help you with your home repairs but in this case, for your safety, we recommend you have the TV serviced. To set up service go towww.SearsHomeServices.com or call 1-800-469-4663 (1-800-4MY-HOME). 

Thank you for your understanding in this matter. I hope we can help you with any future repairs. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
December 02, 2014
Q:

Washer don't start. XQJ50-31 Haier Washer

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when the washer won't start.
 
Glad to help out.   Im  looking at your Haier Washer model number XQJ50-31.

The item you need to look at is the lid/safety switch.   The switch has deactivated therefore it will not run.  You can always check it by a meter for its continuity.

Lid switch per model xqj50-31

If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com
 








Read More
Larry L -
Sears Technician
February 18, 2014
Q:

I have a Haier washer XQJ50-31

A:

I am sorry that you are having some difficulties with your washer and I will be happy to help. I did some research and I was able to find a link that will provide you with some good information. I hope this helps with your washer troubles while you wait for your expert response.

Read More
Joseph P. -
August 08, 2012
A:

You could have a problem with the lid switch in that washer. A wiring problem or a bad electronic control board would also cause that failure. Technical information on this Haier washer is limited. I posted a wiring diagram in the first image below. I believe that I have the lid switch circuit traced in red/white on that diagram. You can unplug the washer and check the wiring connections on the lid switch and the control board. You can use a volt/ohm meter to check the resistance of that circuit from the control board (with the washer still unplugged ). You should measure near zero ohms of resistance (continuity) through that circuit with the washer lid closed. If you measure infinite resistance through that circuit then you could have a wiring failure or a bad lid switch. The second image shows the procedure for opening the console. The third image shows a parts diagram for that portion of the washer. The control board is Key 3 in that image. The lid switch is Key 26. If that lid switch is bad, it will need to be replaced. You can order parts from this page: Haier Washer XQJ50-31 Parts . Be sure that you unplug the washer before accessing and replacing internal components.

If that lid switch is okay, then you may have a bad control board.

These tips may help you fix that washer problem. If you need more assistance, reply with additional details.

Based on the limited technical information on this washer, you may want to have a service technician repair this failure. You can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
August 10, 2012
See more answers