Model #50187 TEST RITE Jack Hydraulic

  • Hydraulic Jack
    3 Results
Find part by diagram >

Question and Answers

Q:

Problem with Kenmore range hood

A:

I understand the concern when it come to the proper installation of your range hood. While you are waiting for a detailed reply from an expert I have done some research on your model on the Manage My Life website and have located and provided the link below the owners manual to your model. Hope this helps!

Read More
Priscilla V -
May 21, 2012
A:

I know that it can be very frustrating when you have the wrong parts for your range hood. The filter that you need is the 50183, however this has been substituted by the manufacture for the 50187, which is thicker. I looked to see if any of our other resources has it, but it looks like they all get it from the manufacturer. So the part that would be sent is the 50187. I know this is very inconvenient, but unless you can get a hold of the original filter this one will have to do. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
May 22, 2012
A:

AnneJ, I stated that I have a model 50183 filter. The filter packaging indicates that it is a 50183 filter, and not 50187 that is supposedly the thicker of the two . Why would the manufacturer substitute a filter that ultimately is the wrong size? Beyond being an inconvenience, I can't see how the fan blades rubbing on a filter could be any good for the blades or the motor. In addition, this filter needs to be replaced on a regular basis, so you are basically saying that the right filters are not available. I would have never bought this range hood if I know all this. It certainly would be returned, but unfortunately I already installed it. Not a satisfied customer at all.

Read More
Ron -
May 22, 2012
See more answers
Q:

Repair Hydraulic leak in Craftsman 2 Ton Jack

A:

Having to repair a leaking tool or appliance can be tough. While you are waiting on an expert to answer your question, you can visit Sears Home Services website to set service with a Sears technician. I have attached the link below. Have a nice day!

Read More
Dezeray -
May 09, 2012
A:

Thanks, I will have a look at the link!

Read More
Phil -
May 09, 2012
A:

Thank you for your question on the floor jack leaking oil.

You may have to remove the power unit from the frame in order to get the wrench onto the nut.

Could you please verify the model of this jack because I am having a problem finding it by that number in our system? Is it possible that the model number is 875.50178?

If you need an o-ring seal kit I may be able to help you.

Sam A.

Read More
Sam A -
Sears Technician
May 11, 2012
A:

Hi Sam, Here is the info on my Craftsman Jack. Hope this helps? Phil

Read More
Phil -
May 11, 2012
See more answers
Q:

What's the difference between "Ducted" and "Non-Ducted" range hood filters -- NOT the hoods themselves -- but the filters?.

A:

I can understand your concern. I researched your question and was unable to locate information that would be helpful. An expert will respond shortly. Have a great day!

Read More
Jackie S -
February 12, 2012
A:

Thank you for your question and I understand your concern.

The non-ducted units will usually come with a grease and charcoal filter and ducted units only need the aluminum grease filter. The aluminum grease filters can be removed, cleaned and re-installed. The aluminum grease filter for your model is part #RBF0801 and is available to order from SearsPartsDirect .

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
February 13, 2012
See more answers