Model #501 DIRT DEVIL Vacuum, Hand-held

  • Assembly Schematic
    3 Results
Find part by diagram >

Question and Answers

Q:

Why does the light stay on in my Kenmore Elite refrigerator, model # 795.77243601?

A:

The main control board (PCB) and a new light socket harness assembly will be needed and if the lens is melted it will also be covered under the extended warranty for this failure. Both of these parts have been updated and the warranty has been extended for the life of the product for this particular failure only. You will have to call a technician to have the parts replaced under the extended warranty.

Read More
Joey S -
Sears Technician
December 18, 2009
A:

I have this exact same model and exact same problem. We recently relocated to Ottawa, ON Canada. I've called Sears Customer Service and even had a Sears Home Services tech come out - they all state there is no warranty coverage for this problem. Is there any more specific details I can use to track down this extended warranty and have the repair covered?

Read More
Chris -
May 07, 2010
A:

I should have mentioned they said there was no extended warranty for this model for any issues, not just this problem. Just in case someone thought it may have been diagnosed as being a different problem. The tech actually diagnosed the issue and the required parts the same as posted by Joey S.

Read More
Chris -
May 07, 2010
A:

Just wanted to give a final update ... after much frustration and no less than 10 phone calls to different Sears folks in US and Canada, Sears Canada finally recognized this was covered as per Joey's posting above. Sears USA have it in their system as a known and specially covered problem. To get Sears Canada to recognize it, you have to call corporate customer service and request that your local Sears Service branch call you directly. The local branch will then investigate if you push them. There is no direct number to contact the service branch directly.

Read More
Chris -
November 20, 2010
A:

I have a similar fridge: 795.77243602 and I'm having the same problem. Can you tell me what part number I need to fix it, and instructions on how to fix it?

Read More
Cory -
May 12, 2012
A:

There's no guarantee the cause is the same for your fridge. I had a tech diagnose mine. You could try calling Sears to see if there is an extended warranty for the same issue on your model. Having said that, replacement is fairly easy (assuming you have the correct parts to fix the issue). You can locate the parts on searspartsdirect.com (see link). The PCB board is on back, just remove the board cover (501F on diagram), then swap the PCB out - just standard pcb clip connectors for the wires. The lens cover is simple enough to pop out by hand, but I'm not sure what's involved in swapping the light casing or sockets if they need replacing. According to the diagram, the main PCB for your fridge would be 501A (on diagram), part number 6871JK1011A @ $143, BUT they also list another part as Main PCB 501AA (not shown on diagram) part number 6871JB1375H @ $200 - perhaps an alternate or updated part, or could depend on your specific model/options. I have no idea - probably best to call Sears before blowing $150-200. The light lens cover for the main fridge area (not freezer) is 158A / 3550JJ1104A @ $27 which is what melted in mine. But you may have damage to other parts of the light assembly which consists of a number of parts (Case: 503D / 3110JJ1021A, Socket assembly: 410A / 6621JK2002D, Reflector: 409D / 3034JJ1002B). Final disclaimer: this is all my guessing based on my experience with a different model and not knowing anything about your fridge or specific problem. You should call Sears to see if you can get special extended warranty coverage for this issue. If it isn't covered, they should be able to assist you in identifying the proper parts over the phone. I have always had good experience with parts folks helping out and they've told me if they recommend the incorrect part (which has never happened) they would waive the restocking fee for returns and as well as shipping for replacement part. Best of luck!

Read More
Chris -
May 15, 2012
A:

does it matter if the part# 6871JB1375H is manufacturered by LG? this board fixed my light issue, but now the freezer does not freeze. i put the old board back in for now.

Read More
Doug -
December 15, 2014
A:

I am still having this issue. Can I still have this covered by an extended warranty?

Read More
Kristin -
September 28, 2015
See more answers
Q:

Craftsman Miter saw model #315212220 315212220 Craftsman Miter saw

A:

Thanks for the inquiry and for being a valued member.

Unfortunately, we do not have an option or substitute for the original dust shield 980299-501 as of now. You could try running an online search for the part number to see if you can find one in circulation on sites like Ebay. 

We apologize for the inconvenience and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
July 06, 2015
Q:

trobule code 79099123402 Kenmore Elite Electric range

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Whirlpool washer.

From the information you have provided above, I can understand the frustration of having your washer malfunction, after researching model number 790.99123402. the error code F5 01 indicates an issue with the control board of the unit.  Sometimes it can just be a glitch. Unplug the range for 5 minutes and plug it back in, if the code returns when you plug it back in the control board may need to be replaced. the part number for the board is 5304455004. If you would like to set up service you can do so at www.Searshomeservices.com .

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
April 18, 2015
A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore range.

From the information you have provided above, I can understand the frustration of having your range malfunction, after researching model number 790.99123402. the error code F5 01 indicates an issue with the control board of the unit.  Sometimes it can just be a glitch. Unplug the range for 5 minutes and plug it back in, if the code returns when you plug it back in the control board may need to be replaced. the part number for the board is 5304455004. If you would like to set up service you can do so at www.Searshomeservices.com .

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
April 18, 2015
See more answers

Top Parts