Model #48624594 CRAFTSMAN Spreader

  • Spreader
    3 Results
Find part by diagram >

Question and Answers


I have a spreader model # 48624594 and the door at the bottom dosen't work right. what will help.


Hi, You can visit our website. I attached the link below. Hope this helps!

Read More
Dezeray S -
July 13, 2010

I am already here.

Read More
nate01 -
July 13, 2010

Check the linkage between the flow control arm and the slide gate at the bottom of the hopper. Make sure that all of the fittings are secured properly and that the mechanism works properly with nothing in the hopper. Use the information on page 6 of your owner's manual to properly adjust the flow control arm so that the slide gate at the bottom of the hopper just closes. Here is a link for the owner's manual in case you need it: Owner's Manual . Clean the slide gate mechanism and make sure that it is dry before loading the hopper and using it so that the closure gate will slide properly to open and close properly. These tips should help. If you need more assistance, submit additional details.

Read More
Lyle W -
Sears Technician
July 15, 2010
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show