Model #48624504 CRAFTSMAN Lawn Vacuum

  • Vac System
    3 Results
  • Cart Body
    3 Results
  • Impeller Housing Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

have a sears leaf shredder vac on trailer cant find one

A:

Thanks for the inquiry and for being a valued member.

Without a model number provided, I am not sure which setup you have. However, I will provide the general instructions to remove an impeller for a leaf shredder.

The engine shaft is typically tapered, so you have to break the impeller loose from the shaft. Remove the bolt and washer holding the impeller on the motor shaft. Start the bolt back in the hole. Run it in until the head is only 1/8 inch away from the impeller. Place a large screw driver or pry bar between the impeller and the rear of the shredder, and pry hard on one side. Hit the head of the bolt firmly with a good sized hammer. The shock will break the impeller loose and it will come off. If the impeller does not loosen up with a couple of whacks with the hammer use a quality penetrating oil and allow it to sit for at least half an hour. If the impeller does not loosen after that, do not continue banging on it, you could damage the shaft or the engine.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
May 10, 2015
A:

Hello Mr Wallace, thank u for responding,, my model no. is 486-24504 serial no 4202. I tried using a wheel puller, but became afraid of bending impellor. if removal instructions are different for my shredder please let me know. i'll try your pry and whack method ,at least i'll get some satisfaction from that. I need to remove the impellor to weld a plate on the inside of the housing ,which wore away to a large elongated opening, after I welded a plate on the outside housing for same reason. thank you gene

Read More
gene -
June 02, 2015
See more answers
Q:

engine parts 48624504 Craftsman Vac system

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your vacuum and I do understand your frustration. Glad to help out. I'm looking at your model number 48624504 and here is a link for the parts diagram for the engine. The part number for the muffler is 693593. I have included a link to our Parts Direct page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
October 23, 2014
A:

Thank you for choosing sears I would be happy to help you with your lawn vacuum Upon researching model48624504; the muffler is # 693593. I have posted a link below of the muffler were it can be ordered.

I trust that this information will help you, thank you have a great day. 

Read More
Jeff Wallace Jr -
Sears Technician
October 23, 2014
See more answers
Q:

Model # 48624504. Impeller removal 48624504

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014

Top Parts