Model #4700A EUREKA Vacuum, Upright

  • Base/hood
    3 Results
  • Main Body
    3 Results
  • Dust Cup
    3 Results
  • Accessories
    3 Results
Find part by diagram >

Question and Answers

Q:

Why is my Eureka vacuum cleaner model 4700A running loud and rough after replacing a belt?

A:

You could have hair or debris that is restricting the motion of the brush roll or the belt may not have been installed correctly. Make sure that the correct belt was used. The information from your owner's manual regarding the changing of the belt is shown in the image below. Unplug the vacuum cleaner and access the brush roll and belt using the information shown in the image below. Check for a problem with the belt. Pull the brush roll out and clean it. Clean any hair or fibers from both sides of the brush roll. This may solve your problem.

If you need more help, resubmit your question with additional details.

Read More
Lyle W -
Sears Technician
September 07, 2009