Model #466 TROYBILT Walk Behind Lawnmower, Gas

  • 21" 3-in-1 Smart-speed Mower
    3 Results
  • Transmission Assembly
    3 Results
  • Lawnmower
    3 Results
  • Self Propelled Mulching Mower
    3 Results
Find part by diagram >

Question and Answers

Q:

Where is the tub bearings and part # and cost? 11045089400 Kenmore Elite Washer

A:

Thank you for your inquiry on your Kenmore Elite Washer, Model: 110.45089400. From reviewing the details on your model, it appears that the washer bearing is only sold with the outer tub assembly. The part number to the assembly is W10253866. The assembly comes out to $466.91I have seen the extended warranty which I have linked up below if your washer fits the guidelines of the warranty you can contact our service department for more information.

Click Here

Safety Warning: Before beginning the repair, disconnect the direct power supply to the washer to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry93 -
Sears Technician
March 20, 2015
Q:

Shredded plastic...loader than normal drum spin sounds 11042926202 Kenmore Elite Automatic washer horizontal axis

A:

Thank you for choosing Sears Parts Direct. I will be happy to research your washer. Upon researching model number 11042926202; it could be the rear bearing is worn out. Turn the drum by hand with the unit off. Check the bearing by turning the drum; if it makes a noise in the rear or is hard to turn it could be damaged. It could be the shock absorbers are worn out as well. The bearing is part of the rear drum which cost about 466.91 just for the rear drum with bearing.

Thank you for choosing Sears. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
February 08, 2015
A:

Thank you! I appreciate the assistance. We went to Sears and purchased a new one, delivery Friday. �???

Read More
karen -
February 09, 2015
See more answers
Q:

I need to know how to install a smooth top on my electric slide in range model 79046612503

A:

Replacing a part on a range could be difficult without the proper instructions. I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below for you to view. I hope the link that I provided is helpful. Have a nice day!

Read More
Yadira B -
November 14, 2012
A:

I want to thank you. The link really helped me. Thanks again and have a great day.

Read More
Linda -
November 14, 2012
A:

Thank you for your question and I understand your concern.

I added an image below with the procedures of removing and replacing the glass top. NOTE: Disconnect the power supply from the range before servicing.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
November 15, 2012
A:

Hi, I am having the problem that others have described. I would like a copy of this image that you show in the post above, but when I try to download it the jpg is very small and blowing it up makes the image blurry. Do you have a higher resolution version? Thanks,

Read More
Matthew -
July 24, 2014
See more answers

Top Parts